Sprocket repaired, making progress
Had a friend with a lathe, cut the weld off the old jacked up sprocket(shown first) replaced with a new, slightly used, sprocket that I found here on the forum.
Still working on the old H30, have a clone that I am building out if I cannot get the old engine going, need to get a new rear tire and tube mounted on this wheel, and an engine on the frame and I will have a rider.
Had a friend with a lathe, cut the weld off the old jacked up sprocket(shown first) replaced with a new, slightly used, sprocket that I found here on the forum.
Still working on the old H30, have a clone that I am building out if I cannot get the old engine going, need to get a new rear tire and tube mounted on this wheel, and an engine on the frame and I will have a rider.