So I have a non-hemi 212 predator, and it ran fine before I started doing mods to it. When I installed the stage 1 kit from GPS, I couldn't run the engine off of choke for more than a few seconds, and it would eventually die out anyway. I replaced the stock carburetor and it still did the same thing. Just yesterday I got a 22mm mikuni and slapped it on the engine, tried to start it, and it would still not start. I am at a complete loss right now, and have no idea what to do.
- has spark but the spark plug is wet (see picture)
- head is in similar condition to the spark plug (tiny bit of wetness and completely black
- key is not sheared on flywheel
- turns over fine, fights back
I've read multiple forum posts on here and people here seem to be really knowledgeable about this stuff, any help is appreciated
- has spark but the spark plug is wet (see picture)
- head is in similar condition to the spark plug (tiny bit of wetness and completely black
- key is not sheared on flywheel
- turns over fine, fights back
I've read multiple forum posts on here and people here seem to be really knowledgeable about this stuff, any help is appreciated
Attachments
-
964.4 KB Views: 21