Recent content by Full Throttle

That's what i'm wanting to hear. Join in everybody, let's hear more about a short stroke hemi . Got some extra parts just laying around so might just try this out and see what happens.

Always loved the Eagles, great band and good music !!

Even if you bore it out to fit the 70mm piston. Thought it would rev quicker with the gx160 crank ??

Thinking of building a short stroke hemi. Take a gx160 bore it to 70mm , put a flat top piston in it and a hemi head with a black mamba jr. cam. Might be a torque monster !

Trying to find some 10/5 amp charge / lighting coils for honda/clone engine , maybe flywheel too.

Put coils on one of my predator hemi's but had to put a gx200 crank in it so that i could use a honda/clone flywheel with the two magnets in it. Then i had a 208cc engine cause the honda/clone crank has a 1mm shorter stroke than the predator crank. Still run good though.

Curious, can you put a predator flat top piston in a gx160 engine or is that too much to bore the gx160 out to ?

Still bumpin and looking for 99cc predator. Somebody got one somewhere .

Mill head .050" , install some honda valves with split keepers, 5mm valve guides , longer push rods and adjust height of rocker arms to keep valve train geometry in check , port and polish head, get a cam from AGK and curved manifold , 19mm carb. and filter , header,advance timing. These...

Hey , this is good stuff. Been waiting on someone to start this thread on charging coils. Now i have some info to start my own setup on one of my clones. Hope to join back in soon with more questions .

Still bump-n !

Bump ! Someone has got to have one just sitting around, collecting dust ??? Don't matter if running or not .

Bump, again .

Sell ??

bump , bump, bump