Recent content by ProMod

Your welcome and thank you for your interest!

Remote Fuel Tank Mount Kit

Welcome to the fun rizzo269 Kits are available here Jackshaft Systems

Mtxnfreeride After a bit of searching I was able to find your order and issue the shipping refund to you. Also covered the clutch/crank bolt and part of the shipping for your second order. As stated... Please feel free to contact us Via phone, PM or email for customer service issues. And view...

Sorry to hear your mixed review Mtnxfreeride. Also about your stuck clutch issue. And thank you for the performance review. I would like to mention that we always do our best to supply good customer support and our phone number is listed on the website. Along with knowledgeable tech...

You might want to look into incorporating our PMR adjustable motor mount plate on the project. I have one on the shops Dyno, have bolted them on to other Race Kart mounts to add some more adjustability and have used them on a number of other projects other than the DB or Motovox mini bike engine...

Nicely done video minibikemods. A nice thing about the PMR mount plate we designed is it can be mounted backwards as you did and still work. Although if mounted backwards as shown in your video, and you try to use the existing slotted holes, then you will indeed end up with limited travel. I...

Mount Install Tip

PMR Motor Mount Plate

PMR Mount Plate

We sell replacement calipers for 22.95, comes with pads, banjo bolt/seals and all. Best to make sure there's no alignment issues or run out in the rotor beating the bushings up. Overheating the brakes will take out the bushings too. Brake Systems and Parts But if that's all that's keepin...

Hydraulic Brake caliper Bushing Fix

Thanks I have not had a chance to measure up one of the new style Predators yet. They are still selling the older 69730 model at our local store. I wonder if the valve cover is slightly taller on the newer version?. Could you not move your engine far enough rearward with the mount adjustment to...

Running a straight pipe without a muffler can typically cause more backfiring on decell due to lack of back pressure in the exhaust. Carb adjustments may also need to be fine tuned for running a straight pipe verses one with a silencer or muffler that has some back pressure. Weather/...

It will bolt on if it has the 2.5 inch 4 bolt pattern on the PTO side cover