Recent content by Vintage_bike_nut

How you see it in the pictures is how it sits currently

Runs and drives but needs to be reassembled. I have all of the parts that it needs to be put back together, chain, clutch, clutch guard, throttle, and air cleaner. It is located in Elkhart Lake, Wi. Im not shipping it pick-up only. $550obo Please call or text 920-286-3637 Thank you

and how do you hook up the carburetors together?

so i removed the head, everything was all carboned up, except for the left side of the piston, the valves and other half of the piston were completely black. i cleaned that and put it all back together and the only feedback i get when i try to start it is a little popping noise. i tried...

i've got to thinking about building a bike with two meth burning briggs engines, with the clutch, is there a special sprocket for engine #2? say if one engine is running more rpm than the other, will it be pulling? something where if the front engine is pulling, it has like a ratcheting effect...

super bronc is gone!!!

I put it in how it came out.

Its a new champion plug and I can tell you one thing, it has a LOT of compression, when you pull it, it either rips uour shoulder out, or lift off the ground. Someone told me that it may be the valves, I think its gonna be a winter project. Thanks for the help

The Vt-10 will be at the Davenport vintage motorcycle swap meet this weekend. If you're going check it out along with my gilson drag bike.

Couldn't tune the motor just right, so I put a new diaphragm in and now she's back firing, and shooting flames.I don't think that's good lol. I've tuned and tuned again on the carb and I just can't get it. Its either running way too rich or way too lean. Can't find a happy medium. Any...

This one is in immaculate condition. Its been restored and hasn't been driven much since then. Powdercoated everything. Even has an electric starter.

took it out on a 1/2 mile flat track at wauseon ohio for the motorcycle swap meet, it was awesome on the track

Bump

Sold!!!!

would you trade for a project VT10?