Search results

  1. madtom421

    Predator 301cc 8hp stock timing

    Would anyone know what the stock timing is on HF predator 8hp engines (hemi head). Can't find it anywhere online. Would it be the same as a gx270? 20degrees? The cam I'm running is a 275 which needs 28 degrees timing. The 6627 flywheel has no timing advance. I just want to make sure I'm running...
  2. madtom421

    Straighten pushrod

    New rod installed. Motor runs strong but it seems like the engine makes more noise than before. Everything was torqued down and checked for clearance. Doesn't seem to have any excessive vibrations. Doesn't sound like rod knock more valve train. Maybe it's just how the new cam sounds? Tommy tech...
  3. madtom421

    Project 301

    Figure I'd update this here's the finished product as it sits now. Rebuilding the engine in my " straighten pushrod" thread
  4. madtom421

    Straighten pushrod

    Not looking for any huge rpms maybe around 6-6500 hopefully. I'm running a 40 series torque converter. Stock carb with larger jet.
  5. madtom421

    Straighten pushrod

    This cam only calls for 32# springs, these are 50# springs in the kit (blue stripe) i think i have some 35# springs would those be a better choice?
  6. madtom421

    Straighten pushrod

    I purchased the stage 2 predator hemi 301kit from gopowersports. They don't give you any information on the parts in the description. The rod and flywheel are from a gx270, the cam is from a gx390. The kit came with duel springs which equals 65# and meant for the 308 cam option. I'm just using...
  7. madtom421

    Straighten pushrod

    Motor specs predator 301 hemi head 8hp stock length billet rod, billet flywheel, .275 cam, 50# springs? (Gopowersports didn't specify the # in there kit I'm assuming 50#) stock compression.
  8. madtom421

    Straighten pushrod

    I'm building a predator hemi 301 8hp motor. I wanted to upgrade the pushrods and had to buy a cut yourself kit as they don't make a direct size pushrod for this motor. I didn't know the correct way of inserting the ball end into the rod and pressed it instead of hammering it in. Needless to say...
  9. madtom421

    Which belt for tav2 7" driven clutch

    The 994-80 fits perfect!
  10. madtom421

    Which belt for tav2 7" driven clutch

    Cheapest I could find on ebay shipped, walmart.com wants $30 for a belt. I can buy in bulk and get a better deal but only want 1 to see if its correct.
  11. madtom421

    Which belt for tav2 7" driven clutch

    I went and ordered the 994-80 belt, I trust my new measurement, $10 shipped I can take the risk. I'll report back when the belt arrives
  12. madtom421

    Which belt for tav2 7" driven clutch

    Now that I have the 7" driven mounted (ebay parts never fit out the box) I have the 6 13/16" center to center. Just so I'm correct I should go 1 belt size above to compensate for the bronze bushing? Come on guys I know this has been done before, can someone explain why belt 994-80 is 1/8 too...
  13. madtom421

    Which belt for tav2 7" driven clutch

    This is the chart I'm using, am I measuring wrong?
  14. madtom421

    Which belt for tav2 7" driven clutch

    Which belt would you suggest?
  15. madtom421

    Which belt for tav2 7" driven clutch

    Think I figured it out using a comet belt chart. 994-80 or something like that
  16. madtom421

    Which belt for tav2 7" driven clutch

    I'm swapping out the 6" rear pulley/driven to a 7" and the belt is now too short, would anyone know the part number or belt I need to replace it with?
  17. madtom421

    Which TAV2 for Baja Warrior 200?

    Go on ebay you can get them for around $50 shipped. They're all made in the same Chinese plant regardless of where you buy them from.
  18. madtom421

    what do you guys do about snitchy neighbors?

    If I had to guess the kid riding around on the camo bike probably is running no muffler annoying the crap out of everyone. Seriously I don't see how anyone can ride these with a open header. I tried once to see if they're was any performance gain and didn't make it 3 houses down the street...
  19. madtom421

    what do you guys do about snitchy neighbors?

    People reach a certain age where they have nothing better to do but complain about others enjoyment. I have a park/ field behind my house that maybe 5 kids a year use. I used to ride my baja around the outer edge not bothering no one or tearing up the grass. Of course some grumpy old man had to...
  20. madtom421

    Predator not running right

    The carbs don't like it when they sit around. I'd pull the carb and give it a good cleaning. Sent from my SAMSUNG-SM-G930A using Tapatalk
Top