Search results

  1. M

    Super Bronc Project

    It’s officially a roller! Need a few of the brake assemble parts at work but off for a couple weeks so won’t be able to get it. Hopefully can start on the engine soon!
  2. M

    Super Bronc Project

    Got a lil done today. Ended up finding out why my rear wheel wasn’t clearing the fender. It was crooked in the frame lol. After I straightened it and tightened it it clears just fine. Need some spacers I lost for the front wheel. Between the axles hub and forks on the shaft. I have one but lost...
  3. M

    Super Bronc Project

    I’ll post a pic when it’s done. Yeah it’s gonna be pretty nice!
  4. M

    Super Bronc Project

    So today I finally got the last of my parts back from my chromer. Was a lot unnecessary? Yes but who don’t like shiny stuff haha. Hopefully soon I can finally have it rolling to work on the engine. Dropped off my Cadillacs grill for a triple chrome with gold teeth treatment. I know it’s not mini...
  5. M

    Super Bronc Project

    Supposed to pick up the front fork tubes and the front fork bolt and some small stuff from my chromer tomorrow. Was going to send the new tranny bracket out but have already spent way more than I want to on this and still haven’t touched the engine. I’m really trying to get this done so I can...
  6. M

    Super Bronc Project

    Got the new bearings installed in the wheels, new bushings in the neck. Also got the new transmission bracket from Rick and installed the bearings in that. Also installed the tail light. Messed up and had tires put on with the wrong rotation so will have to take those back to get changed to the...
  7. M

    Super Bronc Project

    Still haven’t checked the psi I know for sure it is much more than 5 psi. I think maybe my fender might be a bit twisted too. Going to check in a bit. I did get a little done today. Not much but something.
  8. M

    Super Bronc Project

    The clearance I need is between the tire and top of fender
  9. M

    Super Bronc Project

    I’d have to check. I know pretty high cause they’re pretty hard. The tire shop filled them. I will have to check tomorrow morning with my pressure gauge. Hopefully lowering it will work
  10. M

    Super Bronc Project

    So ran into another problem? I bought these duro tires that are part mud part knob and the are running. In the back on the fender. Anyone ever had this issue? I thought because they are the same tire size as the originals I would not have any issues. Anyone ever had issues with these?
  11. M

    Super Bronc Project

    Yeah. I’m sure I could’ve done something. I contacted Rick Chatten and. Purchased a new one. Will have to send it out for chrome once back. Oh well. Should’ve checked before i sent it out for chrome.
  12. M

    Super Bronc Project

    Yeah the whole bearing spins in it. I do not have the old ones but they were the same as the others. I did have a hard time pressing these out. They were really seized in there. Was thinking maybe I can go with a bearing OD a little bigger. Idk yet haven’t really done anything just thinking of...
  13. M

    Super Bronc Project

    Has anyone ever had this problem before? And what did you end up doing? My jackshaft brackets bearing holes seemed to have wallowed out a little to where my bearings are not press fit anymore and are loose. Already have the piece chromed so I’m hoping to not mess up the finish if I don’t have too.
  14. M

    Super Bronc Project

    So I have the next 2 days off and started assembly on what I can. Haven’t touched the engine yet but figure at least everything else can be pretty much done. Haven’t done much because I need to chase the threads on the wheel Hubs to be able to assemble those and mount on the bike. Doing all...
  15. M

    Super Bronc Project

    Thanks. Going to be able to start assembly soon!
  16. M

    Super Bronc Project

    Picked up most of the parts from chrome today. Still have a few small things. Nuts and bolts. Was more expensive than I would’ve expected but looks good and I won’t have to touch again so I’m pleased. Pic is just a sneak peak. Still have alot of pieces wrapped.
  17. M

    Super Bronc Project

    Looks a whole lot better in the sun!
  18. M

    Super Bronc Project

    Got everything back from the powder coater! Progress soon on what I can do with what I have so far until I get everything back from chrome jail.
  19. M

    Super Bronc Project

    ended up dropping the frame and other parts to get powder coated a candy blue. And still waiting on my parts from my chromer. He did send me a small video update but idk why it does not come up trying to attach. Will post pics soon!
  20. M

    Super Bronc Project

    Picked up the frame from getting sandblasted and wheels from powder coat. Fender has been welded and straightened. Waiting on everything from my chromer now. Thinking about painting the frame dodger blue. Still on the fence on red or blue.
Top