Search results

Still for sale?

is the parts raptor gone?

is it running currently?

is this sold?

What was that?

cpu, are you selling these?

Any chance you want to part the 79cc predator?

Husky that is sweet, that's how I wanted to do my seat also, any chance you could get some pics of that setup?

I've got 22x11-8 tires on my alsport that I'm running around 3-4psi and they seem to run great in the dirt

let us know how it goes, I would be curious to try it out

Yea, when the light turns green you go

The coils attach the engine case inside the flywheel, and the magnets attached to the flywheel rotate around them at engine speed

I have a flywheel with magnets attached and the two coils underneath that came off of a stock baja mb200, is there any way to use these to charge a battery, and then run lights from the battery?

They should be the same wheels that are on the ct200u

They don't have built in spacers

It's not getting Enough fuel, clean the carb and or jet

What the op is describing is not an actual surge in the rpm's it is the fluctuation of throttle being imparted by the governor. Its most likely because those bikes are geared very low and it is topping out quickly.

Yea, the low gearing is letting it hit the top quickly and the governor is kicking in. That is the surging, a TAV will let you get more top speed out of the stock motor without losing the low end

What size are the valves in the rtb02? I have the rtc6 with 27mm intake and 25mm exhaust, which is larger than the previous valves. It also has the split keepers and automotive retainers with 5mm stems.

I used a crowfoot wrench in one hand and set the retainers in with the other when I did my 26# springs, worked pretty well