Search results

  1. madmaxthemic

    carb linkage help PLEASE!

    I got it back together right. I saw that Briggs link also its close but not the same set up I have. On mine there are two linkages that briggs and stratton are calling "govenr linkage bars" that are squeezed very tightly between the motor and fuel tank bracket One of them controls the throttle...
  2. madmaxthemic

    carb linkage help PLEASE!

    I have a 5hp B&S funpower series model 136212-0132-01. Had to buy a new gas tank and forgot how all this linkage to the gov and throttle all go back the way it is supposed to. I should have taken a picture before tearing it apart. If any knows or has a manual please help, Im going crazy. Its for...
  3. more progress

    more progress

  4. more progress

    more progress

  5. Intek Upgrade

    Intek Upgrade

  6. madmaxthemic

    6hp Intek upgrade progress

    I got everything removed and started fabricating a mounting plate to raise up the Intek motor a bit and reinforce the exsisting mounting plate. The valve cover is close to the rear fender if not raised up. I got a new 60 tooth sprocket and when I removed the old one I found that the center hub...
  7. madmaxthemic

    Briggs intek gov bar

    I saw some pics here of a throttle hook up for a briggs intek ohv 6 hp. The throttle cable was hooked to the gov bar. I was wondering does that by-pass the gov or does more need to be done to by-pass. Or what needs to be done to remove it. Is it just the same as removing the gov from a honda.?
  8. madmaxthemic

    Hey, do you possibly know who is making new mini bike frames. Not the cheap one that are sold...

    Hey, do you possibly know who is making new mini bike frames. Not the cheap one that are sold as kits. Unless some are tougher than they look. Is what I would realy like is a new remake of the ruttmans or early LIl Indians maybe even at a slightly larger scale. Please if you know some one...
  9. madmaxthemic

    Doodle bug 6hp intek upgrade

    Just started today on the installation of a briggs 6hp intek. I might even smash the original with a sledgehammer and video tape it for everyones viewing pleasure.
  10. madmaxthemic

    Briggs Intek

    Just got a used briggs intek-190 6hp for free. Fuel tank and carb was filled with water. I cleaned out the fuel tank and got a rebuild kit for the carb. It runs great now and I want to up the horse power. Any tips for a low cost 3-4 hp gain. Also will a Tav 2 fit on these. Thanks, I know...
  11. madmaxthemic

    GX 160 carb

    Just a GX 160 and it runs ok I was just looking for more carb options. Would a Carb from a GX200 or bigger fit right on.
  12. Have minibikes, will travel

    Have minibikes, will travel

    Have minibikes, will travel
  13. madmaxthemic

    Thanks, yeah it would be for me . I wiegh about 210. How about the top end was there any...

    Thanks, yeah it would be for me . I wiegh about 210. How about the top end was there any change. Some things I have read say its like having an over drive gear without changing the rear sprocket. Have you concidered reducing you rear gear for less torque ane more top end. I thinks thats...
  14. madmaxthemic

    Hey. I was looking at your pictures of you torque converter installment and was wandering if...

    Hey. I was looking at your pictures of you torque converter installment and was wandering if they are worth it to get. What were some of the differences you noticed. Mostly interested in the change in top end if any. I think I under stand how they work, by squeezing the top belt it forces it...
  15. madmaxthemic

    3.5 briggs

    No, but maybe just at least get it up to 7 hp. What would that take?
  16. madmaxthemic

    3.5 briggs

    Anyone here ever Build up a 3.5 hp briggs? Are there many parts to make'm push more horse power? Is it worth it? I've been seeing alot 5hp briggs online that are pushing 12, 13 and even 15 hp. If thats the case could a 3.5 stock be made to get 8-9 horse power?
  17. madmaxthemic

    Tav-2 question/problem

    tav What engine are you mounting the Tav 2 on. I have a honda Gx120 that I was considering a Tav 2 for. I really don't know where they actually mount to. Is it the four holes around the external shaft.
  18. madmaxthemic

    Chainsaw motors

    Has anyone here seen any good chainsaw engine minibikes. I know some chainsaws are well over 100cc and producing 8-10 hp and can run up to 10,000-14,000 rpms. Just a thought.
  19. The Twins

    The Twins

    The Twins
  20. crap weld

    crap weld

    crap weld
Top