Search results

I am trying to determine roughly what year and model this Alexander Reynolds mini is. It has the split frame that pivots where the foot pegs are and the rear shocks. Has a tecumseh hs50 67298f ser 827820 I believe the seat was replaced but it still have the Alexander Reynolds sticker on the from...

I have some extra sets of Speedway El Tigre Gas Tank Decal stickers. $20 for a set, free shipping via USPS in the US only. They are printed on High quality 3M film

I just picked up this Speedway and trying to figure out what year it is. The front fender looks to be stock but look different from pics I have seen of similar bikes. The fender perches are welded to the fork legs and not mounted to the bottom of the triple tree. Guy I bought it from said it may...

http://rover.ebay.com/rover/1/711-53200-19255-0/1?icep_ff3=2&toolid=10001&campid=5335845805&icep_item=323780236516

I’m looking to part out a Fox street scamp that I had left over from a project. Has the front disc brake too. If you are interested in parts please DM me, located in San Francisco Bay Area ,CA Forks+bars 75 Disc brake front +lever+cable+wheel. Make offer Rear luggage Rack 30 Lights(tail and...

MiniChop

It looks like you are the go to guy for x90 questions. I just got a 75 x90, just starting to do some research as I have had one of these before. I'm trying to find out how many of these x90 they made I was told they only made 500 of these. I have everything a pipe which seems to be the hardest...

Great looking bike. I have a 75 x90 I am thinking about restoring. Im in need of an exhaust pipe and headlight. Are there any parts houses that have these or ebay the only option? My motor needs to be completely rebuild, any ideas who on the West Coast is a go to source on rebuilding these motors?

I am trying to get a H35 running on a Bonanza I have. I can turn it over and fell the spark if I hold the plug wire end in my hand. But its not enough to spark the plug or arch when i ground it to the block. I took off the flywheel and cleaned the contact points on the flywheel and the magnets...

Nice build. For my CAT i didnt have the brake or any of the parts. I got the aftermarket caliper like you have to work. I made up my own L bracket and used a tensioner I had laying around I had the same size tires on mine when I got it. I found for the rear, the 13X5X6 Carlisle fits good. It...

I picked up a Bonanza 1300 that I want to restore. It is missing the jackshaft, brake hub and needs a seat cover. Just curious if anyone is repro-ing those parts or has what i need. thanks

Was wondering if you wanted to sell just the stars off of the wheels? Let me know I am in Livermore. Thanks carl

i have a 3hp briggs that has less then 5 hours on the motor. Motor sat for about 10 years since the last time it ran. I took the complete motor aparts cleaned the carb, tank and put new plug oil and gaskets on it. The first time I fired it up it ran and idled great. I went back a week later and...

CAT "aka:Grand Champion" barn fresh all done

I have seen some sell for 2-3K on ebay in the past. This one looks really nice. Mine is an original blue and white just like this one but its been beat. Im leaning more toward redoing the 1968 since they only made them 3 years. I figure I can sell the parts from the 74 i have and probably make...

Picked up a aftermarket brake assembly. Had to made some mods to the inside of the caliper to make it fit correctly on the sproket. Made a bracket for the cable adjuster and use an extra cable adjuster I had from a clutch lever I had. Brakes work pretty good with a 185 pounder on it. Its...

I have a 68 K0 honda 50 and a 1972 Honda mini trail( front and rear suspension). I want to restore one of them and can make one good bike out of both of the bikes. Both still have matching number motors in them. Are the hardtail 1968-69 more valuable then the later models? I want to do a...