Search results

A couple of questions.. Does the stock chain cover fit the HF engine? Is the shaft size different, my guess is yes. Where can I get a throttle linkage kit, assuming I cannot scavange parts off the old engine. I know about the complete engine replacement kit, but I don't want the whole...

I have read much about the upgrade kit using the clone engine. I understand that a new mounting plate is needed for this which is part of the kit. My question, is there any series of engines that bolt right up to the current plate or is the stock engine got a strange pattern? I am looking...

OK I pulled off the clutch drum and smoothed oil over the bushing and the race and all is well. I tried to oil it without taking off the drum, but that did not get the oil in there.. In any case, I am good.. Thanks for the direction..

I will oil the bushing and see if that helps..

I beleive the drum rolls freely. Could this be the bushing locking up as opposed to the shoes?? Could it be as easy as putting a few drops of oil on it??

I forgot to mention I backed the chain off in the case it was too tight.

I tightened the chain as it was slapping around. I have not oiled the bushing. This DB30 is only about 3-4 weeks old. I thought the chain loosened up just by wearing in. How often does the bushing need to be oiled

I am new to the MB world and though I understand the concepts of the centrifugal (sp?) clutch, the one on my DB30 is having a problem. When the mtor is at idle, it screeches and kills the motor. I have pulled it apart and it appears to be clean. What is the most common cause of this...