Search results

  1. hal_armour

    PREDATOR Wont go pass 4500 RPM??

    Min, maybe you could add more upgrade info for us all. When I read 4500 rpm, I know there is a governor mod happening somewhere. then I look for what other mods, maybe a different cam or springs so I can offer some solid technical help, then when the mods you list do not include parts that can...
  2. hal_armour

    8" and 9" Wheels for a DB or a custom build

    pm sent , asking to ship to Canada, here's hoping !
  3. hal_armour

    Predator governor removal help!

    here's how ! http://www.oldminibikes.com/forum/honda-clone-predator-engines/35509-removing-governor-your-engine-OldMiniBikes-please-read.html
  4. hal_armour

    1981 Honda 125 HELP!!!!!!

    That spring missing would only cause a stutter or mis-fire at hi -revs. The CDI logo was a "badge" advertising that the bike had Capacitive Discharge Ignition, which was a step above the magnetos which other bikes still had back in the early 80's I would open up as many covers and access...
  5. hal_armour

    1981 Honda 125 HELP!!!!!!

    Here is your spring ! Technically that area of the bike is not called the CDI, that "unit" is called the pulse generator. The CDI is a bit larger and is usually located under the seat. To find the actual CDI follow the white cloth covered wires in your picture upward !
  6. ignition_advance_spring

    ignition_advance_spring

    igniton advance spring
  7. hal_armour

    1981 Honda 125 HELP!!!!!!

    Good thought there Bigrob ! Here is the pic on the ignition advance section of bike. It does not show that spring, but might not be that detailed. Check the area around part #8 and or part # 11 and see if there is any spring holes.
  8. ignition_advance

    ignition_advance

    Xr-125 ignition advance
  9. hal_armour

    1981 Honda 125 HELP!!!!!!

    I think you know what to do with the "sludge". Drain it, wash everything with solvent, drain solvent, fill with generic quality oil, turn it over (and over) without starting it. Drain oil again and this time fill it with the best synthetic oil you can get. Run it for about a half hour, drain...
  10. oil_switch

    oil_switch

    oil switch ess unit
  11. hal_armour

    Did any one wire a dewalat 9hp motor

    Nope No, this time MB165 got it right, the yellow and black are the low oil and the kill switch wiring. Honda calls that unit the "ESS". Think of it as the "or" connection, meaning the the kill switch goes to ground OR the low oil sensor goes to ground. I've got a diagram if you need it.
  12. hal_armour

    Did any one wire a dewalat 9hp motor

    I second the "look under the flywheel" (or at least see if the two green wires come from there). I also second the "if it had a starter it probably has a charger". Sorry MB165, I am thinking the greens are the charging coil, however I also think the rectifier is missng (at least from the...
  13. charging_coil

    charging_coil

    Charging coil wiring info
  14. hal_armour

    Stress and the modern man.

    Canadian Monarchy 101
  15. piston1

    piston1

  16. hal_armour

    Don't want to give it up.

    Oh ye of little faith ! Although I am not a fan of the coke trick, I did not pipe up because I too was curious. From here there is lots of help ! As NOS say's the guts must come out. (Don't worry we know where they all go and can share pictures and Skype with ya !) Clean everything this...
  17. hal_armour

    MB1150TC Bonanza Mini Bike on EBAY

    And you joined Ebay before your were conceived ??? From your profile: "Ebay Member since: Oct-15-99"
  18. hal_armour

    mini bike cover?

    How about $19.95 ? Motorcycle / Scooter Covers - Tarp & Cover Superstore
Top