Search results

Baja MB 200 sprocket question! Anybody! OK I asked if anyone knew a compatible 60 tooth sprocket for the Mb 200 I purchased a universal one it would not line up? The stock one works good, I would just like a little more low-end with my torque converter, looks like no one has an answer for me...

I have the MB200 and installed a tc2 converter definitely a good choice problem I'm having is I purchased a standard universal 60 tooth sprocket and it would not lined up for me on the hub? Any recommendations on which sprocket to get and where?

I have the MB200 and installed a tc2 converter definitely a good choice problem I'm having is I purchased a standard universal 60 tooth sprocket and it would not lined up for me on the hub? Any recommendations on which sprocket to get in and where?

Need a little advice on what to do to get my carb running smooth again? Did the air filter and header pipe knowing it would need a little adjustment but just don't know what is right? I have a .035 jet should I just replace that? Some say the e-tube? not sure would like some input! I was hitting...

A Clutch band brake sounds interesting but I have a comet Tav 30 on the other side? if I call OldMiniBikes they can give me all the answers for the bike I have? Not sure what year model or make I have. Always wanted to redo one and found this one out at a farm in my area and got a good deal, motor starts...

just picked up this lil indian bike and want to change up the brake system. Don't like the home made foot brake on it know to sloppy want to go to the hand band break instead. my question is I need all the specs like what size drum what size brake band cable size and hand grip size and set up...

yes that is what I thought? It just wont move? it is very clean where do I get the black spring from, also where is the screw with the spring I hear people adjusting or removing? can't seem to find it? anyone have a picture? Thanks Again for the help!

What is the black spring mod? I did a good cleaning and oil run a little better still will not even good 10mph seems to be slipping a lot? bike is in good shape has not been used all that much? When I lift the back end up it runs fine? is the clutch shot? should I get a new clutch and jackshaft...

Thank you for the clutch info I will check it out!

Ok I will look it up thank you!

thought it might need cleaning have not even taken the cover off yet. Still new at this I have only worked with torque converters what is the best way? Thanks!

Can anyone recommend a good clutch for the stock 97cc motor on the racer? I think it is a 5/8 but will any 5/8 fit? Just picked one up real clean starts right up runs great full throttle when you lift the back end up but when you get on it to ride it barely wants to go? Thinking the clutch is...

Thank you very much you lead me in the right direction! I think I know what I need now, just have to find the right length!:thumbsup:

Thanks for the advice I will do that, the header pipe sounds great! I would just like to get that throttle cable fixed up right!

Not directly from that web site but a company I think that deals with them?

Problem with my cable with the mikuni carb on my Predator 212? Having a problem finding the right cable? can anyone help! Ordered one with the ball and the ball is to big? I cut it and put in a throttle stop inside and it is not letting it go down all the way? Kind of new and learning still any...