Mine is brand new still in the box but they are very easy to set up. That engine has no governer so just bolt an L bracket to the shroud
with cable adjuster then go through throttle on the Tilly with a cable stop. Done
The stock spring in those clutches cant take the heat because they are not made to. just replace the stock spring in the clutch with the green spring and its problem solved plus the green spring has a higher stahl which is good.
Looks like a good quality frame to me, you can soak the rusty parts in evaporust to clean them up that stuff is amazing! go get that mutha and build yourself a nice lil bike.
Hey Johnny, those mini bikes are built pretty good so you could buy a harbor freight motor and put it on there. if you do they still rev about the same RPM as long as you don't mess with the governor but they do have more torque to get you moving quicker. its an investment but you will have a...
I know a while back when I was looking to put an exhaust on an hs40 that functioned good and was readily available.
Just go to your hardware store and get a 45 nipple, I used a die grinder to hog it out and put that on the motor with a hot dog muffler screwed in it, they sound good, work good...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.