Search results

by the info on the cover 1970 Tecumseh H30 3hp parts list attached

correct on the bracket and switch. you could cut down a piece of angle to make the bracket. looks like its separate not attached. #23

145th day of '70...maybe

thanxx for the info. i read about all the frame issues and lawsuits during my first warrior build. this one will receive extra gussets in critical areas. its just in "mock up" to make sure i got the Pagsta tank/brackets and battery in the location i wanted.

Adran..posted pics. what colors were known on these minis? i see you have/had a gold one, which is really sharp!

hopefully ill start tearing it down soon to get the "latex" protective coating off. ill snap as many pics as you need.

old Baja Warrior i saved from the scrap yard. getting close to finishing it up.

for the money i would go with the ducar 212. its way cheaper and has a good flywheel

Just picked up my first vintage mini. shes rough but should be fun to fix up. best i gather from reading over the site its around a '65 Fox Campus. still has the tag under the seat. other than the engine appears original (minus the home depot paint job) probably should have had a techumseh with...

im getting one of these soon :P

slow moving....... but headlight setup is mounted. with the engine lift plate there is now enough room to be able to mount the batter behind the engine.

shrink wrap, one of the best things ever! maybe solder the wire straight to the blade and loose the connectors for clearance?

Super Cool! im going to work my way toward this eventually on the Baja build im doing.

started mocking this thing up. the switch panel off the electric start engine is gonna make a cool little dash panel.

you check the float/needle/seat in the carbs? thats the usual culprit. replacement carbs are really cheap.

i got some JBL 4410s from the 80s..love those things

i stuck my tires/wheels in the vise and used it as a bead breaker.