99cc

Anyone got a used 99cc predator engine out there that they might want to sell cheap. Let me know.

I just saw that there was a predator 99cc engine (item# 68124) and I called they were discontinued? now you get the 79cc predator, whats the difference? Who is running these on a minibike? I only ask because I am building a very small minibike and every motor I have is too big for the frame...

Picked up the original style Doodle for $90. Looks like it's all there. Awfully dirty and sun baked. Seat,tires are good. I don't know if I paid too much. The original 99cc turns over. Don't know much else yet.

as the title states, i need a doodlebug 99cc flathead recoil pull start. cheap would be good, free would be better lol.

so when i bought my cheeftah mini bike, the engine was placed in the origional engine brackets. The clutch that was on it at the time seemed to fit good. The old clutch had its teeth stripped so i bought a new one. When the new one went on, it didnt sit well with the chain. The chain bent to the...

Cheeftah MB1000 w/ 99cc Predator Engine w/ Utility Trailer

Cheeftah MB1000 w/ 99cc Predator Engine

I have a 99cc Predator with the crank machined down to accept a 5/8" clutch,an AGK race carb with #82 jet, governor disconnected, and an open header. The HF package it was sold in says it was a replacement for 3.5 hp engines. It runs great on my little Ruttman and pulls my 230 lb butt just...

looking for a db clutch (16mm)... must be new or nearly new, no beat and worn out parts please....

I got bored yesterday after doing all my Honey-Do's.....So I put my trusty 99cc Predator on the Toad. I made a racy air cleaner and installed an open header. Looks like I'll need some sort of heat shield for the seat......But it flies.

I am about to install an Autolite AR 3910X plug on my 212 Predator. Is this also a good one for the 99cc,or is it too long? What is recommended for the 99cc Predator? Thanks for any info.

Bought this engine from eBay with the intent to use it on a motorized bike, I just have too many projects right now and I could use the money more than another engine. when it arrived it looked new out of the box, besides an X carved in the paint on the tank it looked great, not even a spec of...

What are your opinions on modern engines on restored vintage minibikes? I know budget is a huge concern. I restored this Taco 44 and threw an old edger's B&S 2hp on it. I I'd like to find a nice vintage 'period correct 3hp or 5hp B&S engine but the ones I found are really expensive. I think a HF...

It's begun! I picked up a HF Predator 99cc last night for $79 + tax and changed the motors out today. I did give the 97cc another chance, but couldn't keep it running well. The 99cc so far has been a straight bolt up replacement. What a difference! I still have to take a few links out of the...

My buddy was having troubles with his blue 2 1/2hp clone from Harbor Freight engine. So he decided to throw on a new Predator 99cc. Both are 5/8" shafts... The problem is that the new Predator shaft wont accept the same 5/8" 20 series driver. The shaft is a little bigger. We even went to HARBOR...