alky

Hello, I have a Briggs flathead that I would like to convert to gas for a mini bike I have, I had bought this engine and a few other engines and parts from an estate sell. so I don’t really know much about the engine,it looks to be open modified to me but idk. I believe it ran on alky before...

Located in Lancaster CA Asking $120 Or best offer Looks like it's in great shape PayPal preferred

Carburetor and tank off an alcohol-fed raptor. Carb has filter adapter. $50 shipped.

I just have a few questions...recently bought a 5Hp Alky Brigs ....guy said the head was milled 10 over and had a racing cam inside...runs on Juice it has been sitting for a long time guy said it's brand new.....But my questions are whats the Power range of a 5hp alcohal motor? And also...

28mm Mikuni alky/methanol slide carb. Year old bought from nr racing $149. Selling Shipped $110 bucks pay 3% on PayPal.

I want to go with a remote tank on the bike I'm putting my briggs raptor engine on and wanted to know what my options are as far as carbs. I don't want to go crazy price wise and want to keep it as stock as possible. Don't even know if there's any aftermarket parts under the hood. The guy I got...

I got a good deal on a couple open kart motors, briggs flathead 5ers, both are running on methanol, something I have no experience with thus far, but wanting to learn. Both motors run but they run very rich till about half throttle then clean out and rpm nicely. Ive replaced the diaphrams in...

5 hp Briggs has 3 stage header velocity stack air filter adapter not sure what else is done it came on a go kart and I just wanted the frame. Comes with a 5 gallon container of VP racing m1 meth and a nor am clutch with extra springs don't know if its any good , but the motor runs good. 100 obo...

The carb is a Mikuni tm24 flat slide. I have made a custom intake manifold to bolt it to my engine. The engine is a harbor freight blue clone with billet internals, ported unschrouded 14cc head with a 27 mm intake valve, and will be right around 13.4/1 CR. The cam is a NR274-0207, CM pushrods...

I picked up a kart with a flathead on it, but I swapped for a clone because I know a lot more about them. I also had no interest in running alky. I am now in need of a motor for a project that I'm starting, and this thing is calling my name. I don't know all of the mods, but I do know it has a...

tillotson alky carb. i was told once you switch you cant go back to reg. gas if it was tinkered with ... havent checked the needles,, came off a alky engine/raptor. 80.00 plus shipping /money order prefered might except paypal have to go through my buddy. out of CA click on pics to...

I did some thread searches, but wanted to get some newer pointers. 212 14cc head 308 cam 3.7 rod Zero deck piston Flywheel 390 carb with arc adapter 72t sprocket Running VP M5 Could barely open choke so I bored the jet out pretty large, can open the choke more (not all the...

I'm trying out VP M5 in my modded predator. I bored out the main into the 60s and it runs well at 1/3 choke (richer?) also conks out at idle (low speed jet needs to be bigger?):shrug:

Hey everyone I've got a tilly carb here for sale. Comes with everything in the photo minus the linkage. I bought this carb not knowing that it was an alky carb. It's got an .875 Venturi and 1.00" throttle bore. It is a little dirty but I will clean it up for the buyer. I paid $60 for it and...

i just got a Tecumseh Star motor and after i baught it the motor in my car blew up so i need to sell it now to fix my car... the motor is a BLOSSOM BUILT Tecumseh Star that runs on alky makes 25-28 HP!!!! aluminum adjustable flywheel aluminum rod and piston racing cam good to 9000 rpm...

For sale..304wx Alky Tilly. I pulled this out for another member..but he is goin a different direction now. It was built by Korndog and set up for a medium build clone/Honda motor. It has been sitting on a shelf since I got it and the previous owner has about an hour of run time on it from...

What needs to be done to convert a 390 to alcohol for my combo...clone,arc std rod, stock bore flat top honda piston,std clone crank,308 dyno cam,heads ported 27mm intake stock exh and big header with opened up muffler.

33mm mikuni pumper or lectron text or call 313 220-2853 {marlon}

Ok friends.... My neighbor is wanting to get into racing carts and asked me tonight if I could build an alcohol engine. I told him Im sure I could if I could just figure out the little specs. Does it require special valves, head, piston, rod, crank, cam etc? I read this post about modding a...

I have 2 alky raptor carbs i have never used. I got them with a lot of stuff i bought from a guy that was getting out of karting. They are #5 castings. One has "finish line" engraved on it. The tank has no rust, Paint is crappy. I have never run these carbs. Both carbs and the tank are yours for...