I have parts from a Briggs 6hp intek OHV.
The intek has a similar block to the animal and some I the parts interchange. I had a briggs animal cam in it and wow what a difference.
Animal cam - $25 shipped
Stock plastic cam $8 shipped
Blower/recoil housing $20 shipped
Heat shroud $8...
About to pull the trigger on a New Briggs Animal for a Big Tire Mini which is the preference of buyers choice ?Was also thinking Formula
Thanks and Happy Holidays
Anyone looking to upgrade their Briggs Intek camshaft from plastic ones to a stock Briggs Animal checkout ebay item 141501052621. Just $8.99 plus $6.80 S/H. Good deal I got 4 already.
Hi guys. I have installed 1.3 rockers along with a .310" lift cam on my animal engine. Total lift is .403". I have the gp960-2 spring kit but the coils bind. Does anyone know what springs I need for this? What brand? Thanks
first post on this forum and like you guys im a minibike nut who loves building dangerously fast bikes that hardly have brakes :biggrin::scooter:
I got a stock briggs 900 series which is based off of the LO206, a very nice engine for minibikes, and it needs to be more like a LO206 and less...
got a used animal was used for go kart when it had a restrictor plate on it ran fine took the carb apart cleaned it removed plate now it runs ok but will not idle not too familiar with the adjustment on the walbro pz carb please help . i do not think it was running meth would it run on gas if it...
Briggs engine with an Animal Walbro pz 22 carb. I did not build this engine ! I ran this engine a couple of times and it runs like a scalded dog. I did take the side cover off to see what was inside. It does have a metal camshaft (probably stock), the rest looks stock. The model number is...
I have a new 69730 Predator 212 on the bench. I have read youngengine's "Predator Build Up Details" thread and have priced out the project to about
$560 plus machining.This engine will produce 17.75hp@6700 rpm.Excellent read by the way. My question is what will it cost me to build an Animal to...
Hi guys, I have a Mikuni VM28 flatslide that will be going on a Briggs animal that will be modified with a 310 dur cam and higher compression. It has the stock jets in it. Are these going to be ok or should I change them out?
main=180, pilot=15, it will be on gas and later on would like to go...
Got this off craigslist for $275 - There are lots of them on ebay for about $550. Mine also has an Aussiespeed $140 intake manifold, and $110 pipe.
Guy bought it for his kid's kart and was too much for him, then sold the kart separate.
I plan to put it on a Bonanza BC1200 and let 'er rip...
Hi guys, I'm in the process of putting together an animal engine with a WF piston, WF rod and an AN MOD01 cam. Has anyone here done this? If so what kind of power/problems should I expect? Hopefully no problems but I have to ask. Thanks
This is a top dead center tool for the predator clone or animal. This tool screws into the spark plug hole and aids in finding true top dead center with a degree wheel. It is also an essential tool for torquing and removing a flywheel nut. $25 shipped.
our boy's first race with the animal
had our first race of the year yesterday.kinda a small crowd,we were fightin the rain most of the day but the kids got their races in
he got second in the first race.didn't quite have the gearing right yet.
2013-2 - YouTube
changed...
View image in gallery
View image in gallery
$325 the way you see it,top plate with fuel pump and cover comes with it.I would like this picked up,however I will help with shipping.Yes it runs! The filter and prefilter is brand new.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.