assembly

I need of a replacement jackshaft assembly for my baja heat. I can get one for $60 new at Jackshaft Assembly for Baja Mini Bike (MB165) Just trying to see if I can do any better. Thanks.

Found what looks like an employee #? 252, plus a possible assembly date 8-28-71 insinde the drum on my ARCO. The pics arent the best. If you have a spoked rear wheel with internal expanding hub brakes on your Bushwacker or other ARco bike check it out. Thanks for lookin, J

I aquired a lil indian at a yard sale for 20 bucks and am having difficulty getting the front end together correctly. It was pretty hacked up when I bought it but I painted the frame and am puting in a 3.5hp briggs for my young son to ride. I need help putting together the front end because it...

I am looking for a Carburetor and tank assembly for a briggs 3hp. I bought some motors and all but this 3HP are complete. I'm not all sure what fits.. If you have what fits let me know a price to 95206 California. Thanks.

I need a 3.5 Tecumseh pull starter Tin cover , I have a decent shroud ,if anyone has one they want to part with LMK. Thanks Mark:thumbsup: This is the one I need , Its from a power-sport engine ,As you can see this one is a little mangled up.

when i removed the rear wheel there were 2 spacer bushings. One is a little longer than the other. Damned if i cant recall which one went on which side? i can prolly figure it out but if anyone knows of the top of their head -- Thanks!

I am looking for a used or NOS clutch for this little "Bullet"....anyone out there know where I can aquire one?

I'm looking for a quality 7/8" throttle twist grip for my DB. All the ones I've seen (not that many) are of cheap quality. Any suggestions?

Alright, I have a couple questions with my clutch and electrical system: 1. Which way do I roatate the coil to advance the timing all the way, clockwise or counterclockwise? 2. Looking to redo the wiring but I need to redo the plug. Where do I get these electrical connections...

I need the plastic part for the recoil assembly, the part that the rope actually winds around.. The edges of mine broke off, and I need another one so I can ride or possibly sell my Super Bronc... -John

Looking for the muffler and air cleaner assembly like in the picture. Anyone have them for sale? Mike

Hi, I'm new here and I need help. I'm looking for a detailed photo of a Powell Challenger. Specifically, I ned to know how the jack shaft mounts to the frame. I'm missing parts. The one I have has a solid mount (4 slotted engine mount holes) to the frame. Thanks a lot

Hi evryone, im new here, but i have encountered a Rupp Hustler so i thought the time was right to join:smile: I got the mini bike and i need to know how the clutch goes back together, its in a bunch of peices, it the clutch for the belt drive, can anyone find an exploided view of this...

does anyone have a complete DB rear wheel assembly for sale? i need the wheel, tire, rotor and sprocket. it's for another project i'm working on.

would someone be so kind as to post a pic of a manco h35 throttle assembly (a shot from the rear w/ all of the assembly including the gov.) I would be very happy !!! thanx:biggrin:

I have a really nice 6" gilson 6 spoked alum wheel with a Riverside tire, lots of tread, not all dry cracked, 36 tooth sprocket and brake drum, bearings... $50 plus shipping..

Hey, I have a few questions regarding the brake band set up for my Manco Chopper. It has been awhile and I just can't remember how this set up is supposed to work ? I know that the brake drum mounts by 3 bolts inside the wheel rim then the 4" inch brake band, of course, goes over that. Ok, now...

Hi All, I need to assemble a mini bike I have.It's the first time for me and I'm not even sure I can do it.I have the asusa frame,# 35 chain,clutch,HF engine, 6" rear tire/wheel/sprocket,axle/spacers/nuts.I know what needs done but am not sure how to start.Ok firstly,I thought I would center...

well I have a 6.5 HF clone , Is It necessary to have the crankshaft and the flywheel ( which is the arc racing billet flywheel) and cam all balanced as one rotating assembly. If anyone knows this it would be helpfull , and will the clone crank be ok , or should I get the honda...

This might be helpful to some newbies out there, saw it on an ebay item. http://www.smartkartparts.com/minibikeassemblyguidelines.pdf Hope this helps someone.