belt

I'm just getting back into this minibike thing for my 5yr ol boy. My go-cart phase was more than 30yrs ago. So I'm a little hazy on what a complete Comet Clutch looks like. I bought a project Trail Flite SS400 for $50 that is missing the engine but most everything else is there. I have...

Belt drive funky mini bike

I'm wrapping up my restoration on the 1970 Rupp Roadster. I had a Comet belt from another bike that I was under the impression would work. It's a Comet 200423a -- However, after placing it on my bike, it appears to be too large. After a bit of research, I read the 200423a is a little too big for...

New guy first post ,, (after intro) I just found a really nice Speedway Shrike mostly all there except for the engine side torque converter clutch I even have the clutch cover and belt but no front clutch HELP! does anyone know what part will work for this?? the pulley on the jack...

I got a comet tav that came with a 5 hp briggs I bought from cl. It came from a gokart and has no belt. I was looking for new belt on ombw but don't know which one to get. Here are some pics. The secondary has a 20 on it.

Who knows the correct belt that was stock in 71-72

First belt is a Comet replacement by Rotary, brand new. Mounted, found to be too long, and never turned. Got it from OldMiniBikes. Part number 12-13058, replaces Comet 203586. It is a 3/4" symmetrical belt, 35.1" 6" driven: Center line would be 10 3/4 to 10 13/16 7" driven: Center line would be...

i just acquired an old alexander reynolds arx rolling frame. i bought a snow blower for the engine. its an old tecumseh engine. i just didnt know or rare this bike is. ill ad pics soon. im just stuck on how to hook up or modify the throttle to the lever on the handle bars and a clutch/pully and...

looking for a clutch for a 3/4" belt with a 3/4" bore thanks Ken

5/8 symmetrical belt with a 3/4" bore please.

[B]Hello Folks, I am new to the forum! I have a tote gote model 403 that I have just installed a new belt on. Any tips on what my belt tension should be? at idle the belt just starts to barely engage. At high rev it struggles to reach peak speed with vibration. I am new to this...

I just picked up this nice original Tote Gote 780, it runs good but I am tossed between selling it or putting a new belt on it and waiting til summer to ride it and enjoy it. My question is , where do I find the correct belt for it, the one that is on it is too small and stretched out. Thanks...

I'm hoping someone out there has a pair of TriCat 5 lug rear wheels. Mine are pretty rusted on the inside also the correct belt or # for the Horstman converter. The engine is a Kohler 5 hp. Steve Albright

Hey guys, I tried re-posting to my original thread but was denied. Here is the link: I replaced the driven pulley, axle and bearings with the help of Scott and Ron Kimball. Super cool guys and very helpful. Unfortunately, I am still having the same issue as before, the rear tire spins...

Hey everyone, I bought this torque converter,,, Torque Converter Kit CVT 3 4" for 40 41 or 35 Gear No Returns See Listing | eBay Here is the description Go Kart Torque Converter, #40/41 or #35 Gear included. Driver Unit is 3/4" Bore- Replaces TAV 2 and Manco 5957, Comet 219552, Yerf Dog...

Anybody tried or seen a leather belt drive? Like a vintage HD etc?

Hey everyone, Im not sure how to measure a TC to determine which belt to choose, so hopefully you guys can help me out! This is the TC i bought,.... Torque Converter Kit CVT 3 4" for 40 41 or 35 Gear No Returns See Listing | eBay and I want to buy a good belt from one of these. Which...

I have a Trisport that came with a Horstman torque converter. I am unsure of the model the trike is, but I know it is a TS series thanks to this site. Does anybody know what the specs are for belt and center distance? I guess most important is belt width as I can figure out center distance...

I think I've found the only item at harbor Freight that wasn't made in China. It's an adjustable drive belt for my Craigs List table saw.

the engagement point? As soon as the engine fires the driver pulley slides over against the belt wanting to engage. When I kill the engine just as it comes to a stop the pulley slides back away from the belt. If I take that black bell off will things try to find their way back to the factory...