block

I have for sale a Honda GX160 block, Side Cover and Flat Top piston and rod. Low oil sensor, and Governor holes plugged. Bore has a fresh cross hatch. Bought the block and wont be using it. I do not have the rings for the piston, but is a Z4M piston. Block has been clearanced at the bottom of...

Has anybody ever polished there small engine block? I would like to see pictures of one before I do mine so I get an idea how it would look. Thanks

Looking for a solid state lighted flywheel for h50-h70 Tec...I can get a new lighted coil if you don't have one, I mainly need the flywheel..

new minkui 34mm, $55 shipped

New cool bore block. Was a shortblock. So it has been assembled before. Old style with plunger hole for points. I can do pics later. $40.00

looking for a cam 275-310 lift, billet rod, 92mm piston, 5/16 guide plate.

Attached is a picture of a block that is listed on Ebay. Notice what looks like cracks on the inside of the lower case? Would this be something of a red flag? OR, could they be just casting marks from when it was made. Has anyone noticed thses on any blocks you have rebuilt? OR could they be...

Any one have one for sale?

cash on hand. message me!

So I started to gather parts for my 2.815 genuine GX200 build and I have already bored the block. is it possible to go back and do atleast some minor bracing to the block then just have the bore honed to be true again or am I just stuck with it like it is unless I bore it again?? also I'm still...

Black is a h50 newer. Runs good. $100 plus shipping White is a Sears h60 has spark and compression $75 plus shipping

I know nothing about it, was told "it runs good" it came with a mini package, that being said id like 125 plus sip for it please pm me with your email addy and I will send pics

This is a beast from Hell! Not for the squemish. Please go back to the forum while you can. Pulled this off an overpowered retro lil mini bike back in the 90's. Powers up, but needs a carb and the usual goin over. Compression will kick you back into the last Windber ride......Twice. Starts...

On the later 90's blocks (H30 35 40) with electronic ignition, does anyone know if the lugs are still cast into the block under the flywheel for points? Any one of those I have ever had/serviced there was never a need for me to pop the wheel off :doah: I have a mid eighties block (H35...

Heres the perfect foundation for your next performance build. One NOS, iron bore Briggs raptor block. The lifter area has been welded for big cams, and the spring pockets are cut. Lifter bores can be chamferred upon request, no additional cost. $200 obo free shipping inside the lower 48, $25...

I have a rebuilt HS40 Short Block off a early 70's Ruttman.This was rebuilt some years back sitting on a shelf,New Rings,Valves re- lapped,Lash brought in.Excellent candidate for a buildup. $50.00 plus shipping paypal or local pickup

Starting to get all the parts together for my new build. Building a full open clone this time around and I will post as I make progress. Starting out with a 2.815 big bore/long rod combo from Clements. Got the block and side cover powder coated last night.

Greetings! I have a 5 horse aluminum b&s that my wife picked up for me at a yard sale last year! Holding it would help to get my mini project going. I knew something was up since this motor is like brand new inside and out, she only paid 20.00 for it. When something seems too good to be true, it...

this has been done a hundred times :laugh: old style predator was a cl find with all the goodies :thumbsup: but the block was crap previous owner had drilled out mounting holes real bad and there was over spray all over the block like the bike was painted with the motor on it and no side cover...