bolts

I was using a Torque Wrench that I rented from Autozone (in/lb) following ARC's directions. Before I even got to the 60lbs it asks you to torque before doing the 20lb increments to get to the full 150, one of the bolts broke!! I was able to get the hood part off but the bolt is stuck in the...

I'm looking to find out if they sell Complete Bolts, like in a Kit or something, for a H35 Tecumseh Engine. For the whole Motor. I want to take out all the Bolts on my Engine and replace them. I know your going to tell me to go to a Hardware store, but if ya don't know the sizes of all of...

I need to know what size/thread the bolts are to hold on the chain guard. They are the holes right under the clutch. Thanks in advance, Bob

AS you can see, the head bolts do not match. Would like to buy either type, but want them all the same; or enough of either type to do my head! Paul

I've got a gx200 on order and I figured someone on here's mounted one. Can anyone provide me with the measurements for the mounting bolts? I'm about to make a Bolt-Depot order and I would like to order these along with everything else I need. Also, what did you use for some kind of vibration...

Guy's I need a simple answer? What is the length, thread size per inch, hex head wrench size, of the doodle bug 2.8HP engine? SAE-Metric? How long? What size wrench? Stock size? 3/8"-5/8"-3/4" Thank you in advance><! TT :doah:

Anyone know if the handlebar U-bolts are welded to the handlebars from the factory?

I have a bunch of old bolts and nuts that are a nasty color. How can i clean them so they look new and shiny like the new bolts on my mini

hey, dose anyone know how to remove the engine mounting bolts of the DB-30? If so how did you do it? Did you have to use a power wrench or what? and what size are the bots? thanks

Hey i lost the seat bolts for my stock db-30. Dose anyone know were to get some new replacement bolts at a fair price?? If not dose anyone know what size the bolts are. Head up if you take you seat off for some reason like i did make sure you put the bolts back on tight. I hand screwed them in...