bonanza

Hi everybody, I've started to tear down the Scout and decided to start with the brakes. My question is are these 5" shoes? I don't see how they couldn't be, but I don't know how they are measured on minibikes. I don't want to buy the incorrect ones. Since I'm staying stock with them, any...

RARE BONANZA MINIBIKE BADGE | eBay

Original BC seat $125: Solid base and good threaded inserts that work, some minor tears in rear corners Repro BC seat: $80: Original dust boots: $30: Ribs are separated in several places on both. Original headlight mount $35: Original BC tube exhaust...

Clutch Guard and mounting bracket set BC1200-1300. Nice new chrome from Space Coast Plating in Melbourne, FL. Nice clean original set of original mounting brackets with original hardware. The engine bracket slightly damaged but won’t see it under the guard. $375 shipped to lower 48...

These fenders were a test. they were completely covered in rust and were beyond redemption for rechroming or polishing. my powder coater guy cleaned, straightened them out best as possible, and, coated them with his closest powder mix to bonanza blue. it is a bit darker. the half fender was...

Very nice MX roller with Dave Miller fiberglass tank. Frame has no repairs, cracks or damage. Seat is excellent recover. New tires and tubes. Sprockets are all for #40 chain. Paint is Atomic Orange base coat followed by 2 part clear coat (has a hardener). Recently painted...

This is the "long" fiberglass seat pan for the Bonanza's. I am having these reproduced. Made to order.:wink:

Bonanza seat pans

For Sale: 1969 Bonanza Mini Bike – Model BC 1400T – VIN Plate: 40357 $1,400 Hi Everyone. I am new to the forum but have read many posts. I have a very nice BC1400T for sale. Here is the story: I found this bike in 1999 in Southern California at a garage sale. I was living there at the...

Hi, I am looking 4 a rear fender 4 a Bonanza mx1410,mx1510/no mount needed. Can be metal or fiberglass? Also need 2 sets of foot pegs. Need handle bars too. Does anybody have the rear tail light bracket/metal pan mount(under seat)? Prices? Any and all help will be appreciated and remembered...

Looking for a straight set of forks for a bc1000 I would buy suspension ones as well. Badger or no badge is fine. Thank you

Hey OldMiniBikes, I Need the throttle Side DARE (Made in England) grip for my BC1500 Bonanza restoration. I'd buy the Pair if ya got one. Thanks Joe

I'm rebuilding a 1969 Bonanza Chopper and am trying to find the rectangular ID plate (original or re-pop) that rivets to the front of the engine plate. Can anyone help?

I have a set of axles with spacers, foot pegs and bolts and rear wheel adjusters. Also a rear clutch cover bracket. Not sure if adjusters are original but they were on the bike and everything else was original. $40 shipped

I am looking for a nice or new Bonanza rear sprocket for the Go Power wheels. I need this for the Bike Build off. Thanks for your help.

Is anyone repoping the bottom engine mounting plate for the bonanza ? Thnak you Brendan

Got a little time to turn some wrenches in the garage, it was also 83 degrees out here in Cali today a great day to play with my toys. Free time + good weather = play time. Got this Jem a while back but I've been to busy with other projects to work on this one. Since I've been neglecting this...

NOS Bonanza 2 speed jack shaft. Thought I would use it, but looks like not. Has never been used. I did disassemble it and cleaned the hardened wax like grease out of it and lightly oiled the sprag bearing. Works as it should. There is some very minor marks present on the shaft- see pics. Nice...

Hey guys, Ive got a Bonanza chopper with a HS40 Tecumseh with several problems. What I need is to find someone in the central Florida area that could assess and do any recommended work including rebuild if necessary. It runs but lacks power. Throttle linkage is messed up and fuel leaking from...

1960's Bonanza BC1200 Minibike for sale Complete restoration with new Predator 212cc 6.5hp motor. New everything to include tires, tubes, bearings, controls, jack shafts, sprockets, chains, front fork bellows rubber, seat, re-finished wheels, correct paint and hardware. You wont find nicer...