brake

  1. manchester1

    Comet 4 inch brake drums. NOS

    NOS Comet brake drums. (2). These came from a lot that I purchased. 4" drum with 1" center hole. $45.00 shipped to the USA.
  2. Doodads

    Manco 6" Wheels, New Tires/Tubes and Sprocket Brake Assy.

    As pictured, Very nice 6" Manco wheels that have been bead blasted. No cracks or road rash but aren't perfect. Rear wheel sprocket mounting holes not stripped. Tires are new 410 x 350 x 6 Carlisle Stud with tubes from OldMiniBikes WHSE. 60T Sprocket and brake assy bought here on OldMiniBikes as NOS. Also...
  3. E

    5" drum brake w/ flange

    Hey everyone, I ordered a bunch of parts from OldMiniBikes this week and got the wrong drum/sprocket. Seems that they don't sell a 5" with flange although they have the drum (no flange) and the 5" brake itself. If it helps I got a new Azusa 6" Tri-Star wheel with the order, so that's what I need to...
  4. drenchedgremlin

    what size band brake would be used for this size clutch?

    im getting sick of my azusa drum brake on my tote goat. It does not work for S#$t so i am going to install a clutch band brake instead. my clutch is apparently 4-1/16" in diameter. I am wondering if would use a 4" band brake or 4.5" ?
  5. R

    Taco 22DB Brake Arm

    Does someone have the dimensions of the Taco 22DB brake stay arm they can share(length, height, thickness, length of bent sections, size of slot)? Also, was the outer brake cable stop/adjuster originally mounted to the end of the arm as shown in the picture?
  6. Aircooled

    Hydraulic brake install on Motovox MBX bike

    I have a general question in regard to mounting a hydraulic caliper. Does it usually entail modifying the caliper mounting tab? It appears that whichever caliper I use, larger Motovox or small DB type the tab either has to be ground down and redrilled, or perhaps weld a new tab on the frame...
  7. jeep4me

    Kelsey Hayes 220 Brake Caliper

    Picked up this nice little brake caliper, but was unable to use it. K-H 220 1505 with the mounting bracket. Pucks are in decent condition. Asking $65 shipped. PayPal preferred... As a friend or include the fees.
  8. C

    Coleman 200 sqeaky brake

    Hi all. What's the cure for a squeely brake on the ct200u? Thanks.
  9. D

    Most correct brake cable

    Front bracket appears to be 5/16". Rear threaded on brake arm appears to be #12x24. 56" cable. Clark cyclone. Is there a close match to original brake cable available?
  10. B

    Db30 brake hits tire?

    Almost finished with the db30 and with the 15x6x6 tires the brake runs the tire does anyone have a suggestion? I was thinking about shimming out the rotor or grinding a little off the back of the caliper.
  11. Not so mini bike

    Bonanza spinner wheel with sprocket and brake

    8" spinner in good shape. No cracks and the threads are good. 72t sprocket to fit with 5" brake. $75 shipped
  12. KB2ROCKET

    best brake

    I know everyone has opinions on brakes what brakes work best on a 1" live axle on a somewhat heavy minibike
  13. drenchedgremlin

    Drum brake only grips backwards

    I have a sprocket drum brake on this tote goat i got recently. It barely stops the bike even after tightening it. I noticed that if i wheel the bike backwards it grips really hard but spinning forwards & it doesnt grip nearly as hard. i took apart the wheel to see if maybe there was a way to...
  14. Aircooled

    hydraulic brake kit for Motovox MBX10

    Hi guys, It's been awhile since I last posted, but I haven't lost interest. My question is... I'd like to improve the braking capability on my Motovox bike. The single mechanical brake just don't cut the muster, as most of you already know. I see that Hotrod minibike is out of stock on their...
  15. trinik7597

    Stellar brake caliper

    Limtco brake caliper $45 shipped
  16. L

    MCP rear hydraulic brake on doodlebug

    Has anyone run a mcp rear hydraulic brake on a doodlebug or have any pictures of a person that has? I'm trying to run a mcp brake with the stock disc and re-weld a bracket, just wanted to brainstorm some ideas off other members on this forum that have done anything similar, thanks.
  17. drenchedgremlin

    What model bonanza could be blue with a scrub brake?

    Someone is selling their roller for $75 but wasnt able to send me pictures. They described it as metallic blue bonanza with a scrub brake. Im not sure but is it true that only certain model bonanzas had a scrub brake? thinking about driving out to take a look, but id like to have a idea what id...
  18. Sixpac440

    WTB Bonanza sprocket and brake drum assembly for 6" Go-Powers

    My brother beekeeper (Tom) is looking for a Bonanza sprocket and brake drum assembly for 6" Go-Powers .. doesn't have to be perfect, just function as it should .. Thanks Kevin
  19. Phil1958

    Bonanza Scrub Brake

    i think it came off a 200, not sure as it came with two frames i bought. it has a few dings and there is wear on the scrub pad. How does $50 sound?
  20. K

    Give me a brake

    Need some ideas on correcting weak brake complaint. I have an Fox Sundowner that I installed (years ago) an Azusa Engineering model 2208 4 1/2 inch brake plate & drum. Very Weak brake action then & now. I have the brake arm positioned at a 90 degree angle & have adjusted out all the slack so...
Top