brand

MINI BIKES GO KARTS RUTTMAN LIL INDIAN YOUR PROJECTS MAX TORQUE CLUTCH 12 Tooth FOR 5/8 SHAFT THIS CLUTCH CAN BE MOUNTED IN BOARD OR OUT BOARD HAS THE STANDARD 3/16'' KEY WAY AND USES TWO SET SCREWS TO HOLD TO CRANK SHAFT A LOT OF EARLY TECUMSEH BRIGGS USED THESES CLUTCHS PRICE $32.00...

haha back again guys, this time with pics and a price tag. okay im looking for 180. and here are the pics. the backing plate is an original comet. but the driven doesn't say anything bout comet. and i live in long island new york.

hey guys i need to sell this fast, because i need money for a new racing clutch for my briggs animal. or i will trade for a used racing clutch just let me know. this torque converter has never need installed yet! its still in the original box! shoot me a pm and a reasonable offer and i will get...

I have a new Briggs model 15 block, cost $129, sell for $100 shipped A New Clements Billet side cover, Cost $149, sell for $90 shipped A New billet Dyno 356 adjustable cam, Cost $129, sell for $90 shipped Or sell all for $250 shipped

Here is how you do it.. On October 1,2,3 (Friday, Sat, Sun) all Harbor Freights will be having Giant Parking Lot Sale!! and all 6.5 hp clone motors will be on sale for $99.99. So take this coupon 20% Off Coupon <Click Me> print it out and take it with you. Now $99.99 - 20% is $80 plus you...

brand new, these are the ones you cut to your desired length for extremely milled heads, ratio rockers, ect... $25 shipped within the U.S

new never used cheetah clutch, #35 15 driver $150 shipped or will take new WF titan in partial trade....

I have all brand new parts to assemble a gen 5 WF, everything is new except the flywheel cover.. New gen 5 block New Clements billet side cover New wf head (complete) New wf forged crank New wf billet rod New wf piston assem New 1/4" push rods New 356 cam New billet lifters New pvl...

Just got my Doodle bug today and I am missing the nut that holds the forks on. Does anybody know the size so I can get one at the hardware store tomorrow?? I'm too sleepy to try and start it tonight. There is always something missing from the :censure: box!!! Thanks:scooter:

Ok so i just got a new TAV 30, and im contemplating using it on my Taco 100 but also if someone is willing to pay me a very good price then i would definitely sell or trade for a VERY good trade...so feel free to shoot me some offers once again this is a brand new never installed 3/4'' bore 35...

I have a 6.5 clone on my kart and it is impossible to start without putting the throttle wide open. what should i do?

I have no clutch cover/gaurd on my K&S that I just got. Is it a mini bike sin, or frowned upon in the mini bike community to use parts from another make? For example, I really like the "TACO" lettering on the old taco clutch covers/chain guards. Would it be just terrible if I used one?

Bonanza Mini Bikes are back in production : Taco Rupp Tote Gote Minibike these are really nice but a bit too expensive

Mine would have to be Craftsman!!!

This style steel minibike tank was sold through Azusa Engineering way back. Outside is lightly rusted, inside is clean. Small dent on bottom corner. $80.00 Delivered. .

I bought a 6.5 blue clone from HF about a month ago. It's been sitting in the shop sense. Today I started to take it apart to lap the valves and install a billet rod and 18# springs. I slid the rockers off the valves to find that it only had 1 valve cap on the exhaust valve. It didn't have 1 on...

I have 2 brand new engines for sale. Both have 3/4 shafts, 2 1/4" long. They have only been started to see if they ran and to adjust the carbs. Both run good. Asking $125.00 each + shipping. One engine is a later model than the other one. Please post here or pm me. Thanks Ed

I use "Bowling alley wax" from Home depot. Its a wax that doesnt come off with soap and water. It needs to be removed with paint thinner. This wax is good for behind those hard to reach areas like the rims behind the sprocket. Take the sprocket off, clean good and coat with this wx and youre...

Hoping this is an MTD / Trail Flite seat, but too lazy to research. . Any pictures of one mounted?

For sale I have a pair or 2 Used Baja Motorsports Doodlebugs plus a brand new original 97cc motor still in the box. I listed this under parts as there is no title to the bikes nor do they come with one. This is perfect for a father and son as one has a Honda clone 6.5hp motor already on it. It...