cable

  1. azusa bike 212 predator throttle

    azusa bike 212 predator throttle

    azusa bike 212 predator throttle
  2. Custom Manco Gokart Build

    Custom Manco Gokart Build

    60" Throttle cable.
  3. Arctic Cat Brake Cable - Rear - 1972 Prowler

    Arctic Cat Brake Cable - Rear - 1972 Prowler

    Rear brake cable - lever end 3/8", approximately 56" long. Hub end is just under 3" long threaded 1/4" rod with 3" compression spring and nut with convex recess.
  4. Arctic Cat Brake Cable - Rear - 1972 Prowler

    Arctic Cat Brake Cable - Rear - 1972 Prowler

    Rear brake cable - lever end 3/8", approximately 56" long. Hub end is just under 3" long threaded 1/4" rod with 3" compression spring and nut with convex recess.
  5. Arctic Cat Brake Cable - Rear - 1972 Prowler

    Arctic Cat Brake Cable - Rear - 1972 Prowler

    Rear brake cable - lever end 3/8", approximately 56" long. Hub end is just under 3" long threaded 1/4" rod with 3" compression spring and nut with convex recess.
  6. Arctic Cat Brake Cable - Rear - 1972 Prowler

    Arctic Cat Brake Cable - Rear - 1972 Prowler

    Rear brake cable - lever end 3/8", approximately 56" long. Hub end is just under 3" long threaded 1/4" rod with 3" compression spring and nut with convex recess.
  7. ArcticMinibike

    Arctic Cat Brake Cables

    Does anyone have a source for Arctic Cat brake cables? Specifically I am looking for a front cable for a '72 prowler. The brake cables on that bike have the standard barrel on one end that fits the brake lever, and the other end has a long threaded sleeve that fits the hub mounting on the...
  8. buckeye

    cable

    Can I cut the chrome thing off the end of this cable and it still work? And if I can, how? From my mechanical history, you know the dork factor applys. Thanks. I have the same issue with my throttle cable.
  9. trailramdan

    throttal cable hook up on this carb?

    just got this today and ive never dealt with these before either..awhile back i ordered a new cable from OldMiniBikes warehouse and from what ive read i wont be able to use it!!! so any tips and how to's on getting the throttle hooked up?
  10. trailramdan

    throttal cable hook up on this carb

    in how to's?
  11. Miniwood

    Wal-mart Cable kit

    Walmarts bicycle section has really shaped up. They have a 4 piece cable kit (bell)with a package of end crimps for 4.97. Also look like it had end caps incase you cut the cables. Also had some wireless speedometers for under $20
  12. oldrelics

    Brake cable help...

    I ordered a couple of brake cables from a minibike parts supplier and the barrel end is too big for any of my minibike brake levers. The cable barrel is 3/8. What are you guys using? Can I make the barrel smaller somehow?
  13. Cotmullion

    Just a 'ikle tiny cable clevis

    Can anyone spare a cable clevis like the one circled in the first picture (not mine), to replace the shoddy nut and wire setup (which is mine) in the second picture? Looking for something with a grub screw or something like that. Thanks.
  14. J

    Harley X90 throttle cable issue

    Hey everyone, I am almost done with my restoration but having an issue. When I bought this bike the throttle perch was broken on the bottom where the cable goes into the perch itself---so, I have a new perch and a new cable but looking at it, it just doesn't make any sense. There are NO...
  15. roccosbike

    Cable clips

    Harley Mini Chopper Bike Handlebar Wire Cable Clips #2 | eBay Someone was asking about these.
  16. H

    Cutting barrell off a cable then stopping the freying?

    Im in the middle of setting up my throttle linkage for my build off. I need to cut the small barrell off the end of the throttle cable i bought. Whats the best way to cut this cable and then stop the cut end from freying out? superglue? can this cable soilder? any tips or ideas would be great.
  17. derekbmn

    Urgent !!! Narrow Cable Clip Needed...

    URGENT !!! I'm looking for a narrow cable clip for 1" frame tubing. These were used on the lower model Cats to hold the throttle cable in two spots. I have one, but need one more. (although I'll take more if you have them) A little patina is just fine...going on an un-restored original. Pics of...
  18. Miniwood

    Brake cable

    Can you use a throttle cable with the factory doodlebug brake handle assembly? The hole looks too small for the large end brake cables.
  19. B

    Universal cable Kits

    For those who own trikes and are looking for longer then normal cables check out Motorcycle Braided Brake Hoses, Lines and Clutch Cables | Venhill, they sell universal cable kits for clutch/brake and throttle applications. They sell through Ebay stateside. See item 110737267099 for sample of...
  20. patrick2260

    OldMiniBikes's brake cable anchor????

    Got my brake cable anchor from OldMiniBikes today for my 68 bonanza bc1300. It doesn't fit into the brake cable adjustment mounting bracket on the rear swing arm. The anchor is too thick by a smidge. Assuming it is suppose to slide into the mounting bracket right? This was the anchor that I was told...
Top