Does any one out there have a diagram or video of how the cam-driven oil pump works on a Tecumseh?
Question#2-Does an internal oil pump enable the engine to operate at different angles?
Thanks for any replies.
just a heads up to everyone out there thinking about buying the .265 dyno cam. the website, (arc) said that it is a drop in and go part that will fit into a gx200 or 6.5 clone with no modification or grinding. this is not the case, at least in my experience. i installed mine last night, went to...
Sorry, this is a newb question, but I could not find an exact answer. I am not running in a class, just a yard kart at home.
My setup-
6.5hp clone
Flat top piston
K+N filter
Billet rod
Aluminium flywheel
BSP-1 cam
Wiener Pipe + Muffler (will possibly change)
My questions-
1. My...
new to the site and would appreciate any advice i can get. Having trouble choosing a new cam. Engine is powering a modified baja heat. Not track ridden or raced, just an around town and country bike. looking for higher rpm without killing the low end. dont need a torque monster just descent...
Hey
CL1M-$25~
18LB springs-$5 for the set
All the stock parts for $25~
Plus shipping. Most would fit in a $5 box but some parts would need a medium box or something like that.
I've been around some motorized biking forums for a while and have decided to move up to a GX200 clone on a...
Forgive me if this is known/been posted before, but it covered a lot of the questions people ask about what gains the most power.
I did not write this, I just found it when Googling.
I posted in general engine mods as it applies to all engines, not just Briggs.
Hope this helps some people...
This is my first attempt to rework a motor. Is it possible to put a cam in 180' out of time.I have spark, gap on flywheel is good, plug gap is good. It seams that gas is on push not pull. It has a back fire thru the carb. I bought the Best Bang For Your Buck from affordable go karts. Any help.
so i have a 6.5 hp briggs intek with the following addons-
-billet animal flywheel
-animal walbro slide carb.
-animal carb spacer
-heavier duty animal valve springs and hardend retainers
-animal ballbearing crankcase cover
-very light porting
-billet con rod
now my question, if i got...
Hi everyone. I love all of the info I have gotten from this site so far. But with all the reading I have done I am still somewhat baffled on a few things. Before i start with the questions. however, I want to let you know what I want and what I'm doing. I have a brand new HF-6.5c engine with...
Just returned from a 5 day camping trip at the Alvord Dry Lake Bed. It was a Blast as Always. This time I took a few RC airplanes along to play with and decided to strap the GoPro HD Helmet Cam onto the Twin. Here's a short video of a flight around camp. Click on 720P to see the best picture...
I have a new Precison 145 cam for a 5hp B&S $30 +ship
cam specs Profile Sheet
Milled 3hp B&S head milled with fireslot $20 +ship
Animal billet Jr Racecar flywheel with coil, 8mm plug wire $65 + ship
I have a new 265 cam, springs... the cam was installed but never ran before going with a different cam...new old style ported stock carb with the adjustable air screw w/ spring.. Chr push rods....
$75 plus shipping
I have a honda gx200 clone short block with ZERO run time. The short block comes with the folowing mods:
Pollished crank shaft
ARC rod
.356 lift camshaft with pollished lobes
Lightened honda flat top piston
Deck cut to .003 in the hole
ARC aluminum flywheel
Cylender honed true
I...
After, I do the initial testing on this new Ding Dong 6.5 HP motor that has a 265 cam. The cam will be for sale. I will upgrade to a 275+ camshaft. So, if sombody is interested, let me know? It will be priced right..
It is from AGK and no grinding is required...:hammer:
TT Out~
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.