can't

:laugh: Picked these up @ HF. These are the Hemi ones, on sale for 99.00 each and they let me use my 20% off coupon:thumbsup::thumbsup::out::out::scooter:

Hey guys, I lurk on here a lot, and I need your help. I have a Tecumseh OHH60 that has been sitting, waiting to go on a kart or bike. I would like to go all hot rod with it, and beat some guys with predators. I plan on putting a mikuni carb set up for alky. I have access to a fabrication...

Brand new to OLDMINIBIKES, and happy to be here!! I have a mini bike that I just started to restore, but cannot find any info about it. I feel I have looked everywhere online, but no results. It is/was manufactured by KARTS INTERNATIONAL, INC., ROSELAND,LA. and the serial number is 06055...

got a used animal was used for go kart when it had a restrictor plate on it ran fine took the carb apart cleaned it removed plate now it runs ok but will not idle not too familiar with the adjustment on the walbro pz carb please help . i do not think it was running meth would it run on gas if it...

the lugs on the back have me stumped

Some douchenozzle gave me bad feedback on an $8 SHIPPED item without even contacting me first. Item was a CD in like new condition and because it had fingerprints and a couple of the usual fine scratches that even new CDs come with quite often, he leaves neg without contacting.

I remember ads in the back of magazines for a 3 wheeler that resembled a Heald Super Bronc 3 or a Commuter. I remember them being two-tone in color, beige I think. They had 8 HP engines and a traditional Comet drive. I keep wanting to say the name is Quasar, but that's a TV. I've gone...

Please tell me I'm not the only one that does this. Lately (for the past several years) I have been filling notebooks and random pieces of paper with designs for minibikes. I think my doodles have evolved from 30 yrs ago drawing house plans as an architecture student to wooden boats while...

Hi all, I'm having a really hard time finding the throttle limiter screw on my 2.5hp lifan engine. It is a 2012 model. Sticker on pull start says Yukon trail. Any help would be appreciated Sent from my LG-P930 using Tapatalk 2

Hi, hope i"m in the right place. Made a call, stated my case ordered a clutch and can' use it. I ordered a Noram star 1" 13t 35 chain for a father son project. We have a B&S 5HP w/1" shaft. I need the clutch to run inboard for proper alignment. The clutch we received is counter bored and has...

Was told it was a Rupp or Speedway Shark, but after looking through pictures of them, it doesn't look like any. Im trying to order parts for it to restore! Any help is much appreciated. It has a 3 1/2? hp tecumseh engine on it

When I came on here a couple of days ago,I added pictures & could edit my threads. Down in the right hand corner,there were 4 topics there: 1.)EDIT 2.) Quote 3.)Multi 4.)Quick. On all my replies,I only have the 3, MINUS EDIT!!! The thread I started in"Sooty Plugs",called can't edit,CONTAINS...

any ideas??? guy wants 100 for just the roller frame, I don't recognize it as anything I recall seeing, and ideas??? Thanks red423 I am hoping this pic uploaded

NJ Craigslist.....

Need help in finding out who made a mini bike with snow track. I have looked everywhere on the internet and can't find it. It has the frame of a mini bike with a wheel on the front and a ski that mounts under it for snow. The back is long and has a luggage rack behind the seat that is tall as...

I'm so happy with this thing I had to post something about it. I took the attached pic of the Studebaker truck a little while after I bought it today. Could not turn it down. This machine has no dents. Runs. Only 26 000 miles. Seat is perfect and no tears. Dash and instruments are is...

I've done some digging but I have no idea what this frame is...Anybody seen one before?

I no this may not be a big deal, but when you live in the desert wasteland of minibike's any find you make is a good one. A 5.5 clone costs about $235 or a cheap water pump $205. So I walk into Adendorff and theres a pump lying in the scrap section - I asked whats wrong and get told it's...

I bought this a few months ago from my neighbor. It is a pretty sweet little bike. The carb was jacked up a bit, cleaned it up & now runs like a champ! It has a Tecumseh HS50 engine. Could not find any markings anywhere on the frame. My neighbor painted it himself 15 years ago he said...

Can't reply in the parts wanted section? Whats up with that? I thought "no comments" was just restricted to the for sale section.