carbs

Easily enough parts to build 3 modified briggs engines. Everything i have left for 5hp briggs engines $500. Includes stock carbs, stock alky carbs, tillotson carb and intake. Paypal or credit cards accepted. Will post pics later tonight or tomorrow. Just giving a heads up now.

I see the aftermarket or modded carbs are available in .615, or bored to .625 etc. With a digital caliper, the engine side of my stock Hemi carb measures .745 or 18.9mm. What am I missing? I'm replacing a 120cc 4.5hp yamaha engine (kids snowmobile) that currently uses an 18mm carb which is...

Two carbs. One looks like a mikuni clone and the other is a walbro. Don't know much about either carb. They came in a box of parts I got and I don't need them $25 each plus shipping. .

I saw the recent thread on ills with Tecky carbs. Anyone found that Walbro carbs run any better? I still have idle jet clogging problems with them with the ethenol gas these days, but they seem less trouble than the Tecumseh carbs. Any one see this also? -Doozer

They SUCK, SUCK,SUCKKKKKKKKKKKKKKKKKKKKKKK! 3 freakin carbs tried today and every freakin one will not engage the idle circuit. Cleaned em, blew air chuck, etc. Say what you want about a clone or even a Briggs, but they idle. Why is it so hard to make a good product. The carbs are going...

What exactly is the difference between the stock clone carb and the hemi carb? I didn't know there was a difference, but I've heard discussion that the stock carb on a hemi might be better. Bigger bore? Different Venturi? Different jets or emulsion tube? School me, oh great knowers of horse power.

I have a 1970 3.5 scrambler and a 1971 4.0 enduro what carb would have been on them new a vacuum type or a floatbowl type ?

I am doing a Predator build up (results posted in the clone/predator section). I have done all that I am gonna do, until I get it built, and will not be using the carbs on it anymore. All carbs are jetted for a good flowing header (engine has a .880 j-style) and a high flowing air filter...

I got some briggs flatheads with diaphram carbs on gas tank kind one of them bolts right up the other carb the bolt holes are off but will fit different 5hp briggs some heads have 3 bolts for the carb some have to why i want to use this carb on my motor but looks like i gotta switch heads why do...

1 new carb and 1 used carb for parts or rebuild.. oil bath airfilter and intake manifold.. $60 plus ship

Anybody familiar with or know anything about these carbs. The look almost identical to a stock Tecumseh carb but they have the name "AutoMagic" cast into the body. I have owned two of them now....and Mountain Man George has one on his H50 powered Hilltopper...all of them are on bikes...

What Tillotson carbs are you guys running on your mildly modded GX200/Clones? I'm meaning with the governor removed, billet flywheel, billet con. rod, mild cam, 18lbs springs, high- comp. head, etc. Any help is greatly appreciated. :thumbsup:

(Tecumseh Carburetor Replaces 632615 632208 632589 Fits H30 H50 w Gasket | eBay) Will this work on a HS50 as well. I see no reason why it shouldnt. I have used HS50 carbs on a h35 before with no issue at all. But I want to put this one on a HS50. Opinions Also I have a 10hp Tecumseh...

Anyone have any luck with aftermarket carbs? I have two H50's that don't seem to run right no matter what I do with an aftermarket Oregon carb I bought a few months ago. The engines run way better with an old Tecumseh H30 carb. Just wondering if I got a dud Oregon carb or they are just junk...

Don't know anything about them, bought them along with a few other carbs so I could get parts for an old Walbro on a west bend I am assembling. Numbers stamped are on the pics, I have done nothing to them other than take some pics, so I no nothing of overall condition. not froze up or...

these type carbs are the most tunable and efficient carbs. no flat spots since the slide lifts as the engine wants it to not how your throttle hand tells it to. the kehin cv carb that harley started using works graat with simple modification. i was 30+ years in the motorcycle business and i...

up for sale is two 6.5 clone carbs. one is from a champion i think and the other one is off of a harbor freight clone $15 each and a Noram 15 tooth Clutch 35 pitch. has a noticeably higher stall than stock. $25. Located in so-cal. Payments in cash or US POSTAL money order.

Up for sale are five adjustable diaphram carbs I had the small engine shop near me do the following:each one was sonic cleaned, new diaphrams and initial adjustments done. I originally got them from Evil Ed and I am not going to need them, so off they go. Price is $30.00 each shipped from...

Here is another addition to my "unclutter" sale.....This is for 8 miscl pulsa-jet type carbs for smaller displacement engines....some good carbs and some good for parts for parts, all 25.00 plus shipping.

140 carb and oil bath air filter. Carb is ok. Filter housing is rough. $10 plus shipping 390 carb, not much to say here. $10 plus shipping