carbs

I was gonna buy a knock off mikuni carb from ebay to save a little bit of money, I was wondering if I need to change the jets will REAL mikuni jets work, Such pilot, and main jets? need to know ASAP Thanks again Ryan

Tillotson carbs HL365b carb bought new but used once and my buddy broke the flange HL357A with EC carbs linkage flange good carb worked great a bunch of new springs for setting the pop off pressure new EC carbs pop off guage Briggs EC carbs intake flywheel nut for Tecumseh motors...

i have a question =] i have a 6.5 honda ohv and i wanted it to run a bit better so my friend gave me a chinesse carb he had its a 20 mm carb i wanted to know if it would make my enigne faster or slower since its not a name brand carb ?

2 new clone carbs.... $15 ea plus ship One is the old style bored without the locking cap over the air screw.. The other one had the air screw modded so it can be adjusted...

Selling the 2 adjustable Tecumseh carbs I have. Was planning on rebuilding these and using them on a couple of engines I have but I'm tired of trying to hunt down the choke parts. They are mostly complete with choke shafts/lever but are not the rupp type I was looking for, Maybe you have spare...

Show some pics of your tillys on your 5hp's. And what would be the best carb to go with? i will be running a custom exhaust, 3hp flywheel, arc bearing rod, and a cam to wake her up a bit. i like the tillys for the throttle hookup. also what manifolds are the best to run? i was gonna run a...

I see alot of people buying the cheaper Mikuni's they think are 22mm carbs.... On the taper bore carbs they are usually 4mm smaller than advertised due to the taper from the gasket surface to the venturi (4mm taper)..... If you look on the mounting flange of the carb there will be a 2 digit...

also does anyone know how to measure the actual size of where to carb would hook up. one last question could anyone tell me how to hook up the carb or send me a wevsite that explains it thanks :confused::confused:

I have a '60 Go Devil (gas/oil mixture) and the carb needs to be replaced. I don't have much details about the engine ( I think it is a Kawasaki) and I can't find any numbers. Can I use any carb or are carbs specialized to the engine? Any information will be appreciated. Thanks

What carbs do I need to look for for a 5hp briggs if I want to do away with the built on gastank? And are they cheap! Since thos motor does not hav e alighting coild and bike should have one I don't wnat to spen alot on the motor, I'll just search out a tec or something. don't need anythign...

I have two new carbs, both were taken off the engines right out of the boxed to be replaced with mikunis... One is off a gx200 6.5 clone and the other is a gx390 13hp clone carb.... I also have a new gx390 muffler and manifold, also removed from new engine..... Taking offers or possible...

need new carb mine looks just like that i have a old engine briggs and stratton need a new carb anyone have one the piece that my throttle was hooked threw a friend broke it cuz he is dump and spun the throttle too much