Any body using the #35RT gold and black chain DA35HT120 Do they have to use EK master links? If so is it the Standard #35 links? They seem to be a bit wider than my generic #35 links. Thanks Joe
Refurbishing old mini bike that had a 3.5 hp. motor. Replacing with a 212 predator, with stage 1 mods, also using torque converter. Is a #35 chain reliable enough or should I go with something heavier.
Refurbishing an old minbike that had a 3.5 hp motor. Will be putting in a 212 predator with stage 1 mods. Is a #35 chain reliable enough or should I go with a #40 or #41. Will also be using a TC.
Not really sure on where I could find chains for my minibike. It's a 19x7.00-8 tire size and I've tried searching but nothing comes up. I have snow for about half the year and would use studs except I don't want to change tires for when it gets warm again.
Is there a hp limit to a chain. why use any chain size over another and jackshaft size.. iv seen small engine bikes with huge chains and large engines with small chains. school me.
I've trying to finish 3 of my 4 bikes, everything is done with the exception of the chain. I've got everything measured. But the chains keep getting thrown. I think it is an alignment issue, does anyone have any tips and tricks on getting chains to sit right??
Hello all,
Does a Honda GX series engine fit centered side to side on a doodlebug?
Or a predator for that matter?
I hate when I see an engine bolted down off center in order to get the chains lined up.
I'll jack shaft that bike before I bolt it down hanging off the right side
Thanks
Since I am no longer using the jack shaft and never will I figure someone on here may have a use for it. It is the complete jackshaft with sprockets and original chains. The large sprocket chain will need a master link.
Video of it
5wx2Bh-5FMw
$50+shipping
I may be parting...
The Uproar Festival is tomorrow at our soon to be gone Zoo Amphitheater, Casino interests have bought the venue and booked no more shows after June 12th and I hear they will tear it all down soon. It's my favorite outdoor venue and it like many beloved OKC institutions it will soon be gone in...
i need help in understanding the use or selection of the different size chains used on minibikes......on the azuza frame i just acquired it had a large, motorcycle type chain with it....i have searched for chain threads and cant seem to find much...does this question make sense?:out::scooter:
Snow chains, 6 feet long. I guess for big wheels. Just want 3.00 for pay pal fees + $11.35 shipping. I think will fit in medium flat rate USPS box. Total $14.35. shipping w/tracking. Pretty good shape. shipping from burlington, NJ. Thanks
i bought a 41 clutch from OldMiniBikes was wondering if this chain would work with it Drive Chain #41 | Go-Kart + Minibike Parts + Accessories | Northern Tool + Equipment
if that link dont work just go to northertool.com and type chain #41
I have 20 feet of 41 chain suitable for the MB165
This stuff is not expensive and I have no need for it.
Tell me how much you want and I will send it.
You pay postage and if you like buy me a cup of coffee.
Canadians prefered.
Nothing against my American friends but If you want to buy...
okay heres the story i need some way to slot the engine plate without a drill or a way to just put one link section in the chain i have no metal working tools or a drill all i have is basic stuff so any help is good help :thumbsup:
Alright, so I've just put the chain on my new chopper and I've the wheels on and the clutch all hooked up. But I noticed that while I was rolling it, I felt a small change in momentum every now and then. Then I realized when I got home that the sprocket hub is not concentric to the wheel...
My daughter and I were out braving near zero temps a couple of weeks ago. I was pulling her on her sled and I was on my DB30 6.5 on a snow covered back road.
Wouldn't you know it, we get about 1 mile or 2 from home and my chain snapped. Or I should say my master link broke/fell off. Luckily I...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.