choke

  1. derekbmn

    A Choke Question...

    Just a quick question about the choke setup on this style Pulsa Jet carb. I have numerous slide choke carbed motors. (and I really like them) But I have no experience with this newer fixed jet and style of choke and was wondering if this is all there is to it or ? Is there a linkage that...
  2. derekbmn

    B&S 3HP Slide Choke Pulsa Jet Carbs Wanted

    Looking for 1 or 2, 3hp or 3.5hp B&S Slide Choke Pulsa Jet Carbs for the standard (deep) fuel tanks. Must be in good condition with good pickup tubes Would prefer non fixed jet. Please contact me via PM. Thanks !!:smile:
  3. turftech 1

    Briggs choke

    Hi all, I am fixing up a Bonanza for my son. It came with a 3.5 Briggs. The motor runs great, fires right up, good compression etc. Only problem is that the choke is very loose, when the motor is running, you have to hole the choke in, otherwise, it vibrates out and kills the motor. Any...
  4. colrhino

    choke lever bracket

    okay, I asked this question once before, and someone sent me to a go-kart forum (where I found the bracket), but the guy isn't selling them anymore, so I am still looking for a method to hold the choke lever on (with the stock air box off), preferably a bracket of some sort..... any suggestions...
  5. L

    Need choke help

    Hello friends.I,m calling on you once again for help to hook up some type of choke lever.I have a frankenstien bike.I beleive its an older trail sport buffalo and it has a 5 hp tecumseh.I really dont want to hook up a long cable to the handlebars.I would rather have some sort of push-pull...
  6. S

    Fun power choke linkage

    Any one have pictures or ideas on a choke linkage for fun power with gov removed. pictures attached of throttle linkage but i want to keep the choke and air filter Thanks
  7. colrhino

    gray choke lever

    okay, so I put the 6.5 motor on my DB, and put a K&N style air filter on it. my question- when the stock airbox is removed, the gray choke lever is no longer "held down" by the bottom of the old airbox. it can just be lifted off the post. I'm afraid it will come off/get lost when riding. how do...
  8. C

    Need Choke Pull Up Lever for MR50

    Hi, I need just the pull up lever for the choke for a MR50. I'm hoping someone has a parted out carb, and might still have this piece. I need the piece that you pull up on, that goes into the top of the carb. If anyone has one, please let me know what you want for it. Thanks,
  9. kruger

    clone choke problems

    :doah:help somebody, i keep breaking the choke on gx390 clone carb. for some odd reason they made the choke stem out of plastic:out:, and the butterfly slides into the slot .i dont know if during operation the butterfly works its way off center, and then when i turn the choke to start the engine...
  10. D

    Choke location on GX 160?

    Hi,A serious question from a newbie. It's probably the sadest question anyone has ever asked,but I'm truely confused.I know where the governor swingarm and fuel cut-off are,but the lever above the cut-off should be the choke,but it's acting as the engine's throttle,so WTF? The govenor arm...
  11. T

    clone cant be off choke

    i built a nice clone but i put a new pipe on and i cant take it off choke i can only move it alittle to get it to run if i take it off completely it dies i really need help i might be puttin this on my mini but im about to lose my garage so i need answers fast thank you
Top