clutch

  1. Side Shaft

    Rupp Continental clutch cover

    Continental clutch cover and clutch guard bracket $250. Little rust. Email me if interested jayblackcustoms@gmail.com
  2. R

    Need clutch for a 1970's Rupp Scrambler

    Restoring a 1970's Rupp Scrambler and I need a primary clutch to complete. I think I can replace it with a comet clutch but I want to keep original. Any help is appreciated.
  3. danford1

    Wanted: Clutch cover for a 1972 Rupp Scrambler, also seat cover

    I have a 1972 Rupp Scrambler. I need the clutch cover. I also need the mounting brackets for it. I could also use a good seat cover. Let me know what you have and how much you want for it. Danford1
  4. S

    Bully clutch help with set up???

    I have a gx200 with 70mm wiseco piston,f275 cam,1.2 rollers, big valve head,12.5 compression, race gas,28mm mikuni, I dont know where my peak torque is on my motor do I have to get it dyno to find it I put the motor together, motor runs great now.does anybody have this set up and might be able...
  5. B

    69 Rupp Roadster clutch slipping advise

    My 1969 Rupp Roadster is all original and when purchased a year ago it had a slipping in the clutch when it transitioned from 1st to 2nd gear. I dissembled the jack shaft and replaced the Sprag gear and it ran perfect. Stong shift from 1st to 2nd. Now after a year it is doing it again. Can it...
  6. Joe-405

    Modded 420cc Mini Dragbike w/3d manual clutch

    Well i sold the original designed chassis with the nitro 44 from minichopperssocal - 909 minibikes So i shall start a build thread finally of the new chassis im currently building...............pic is old chassis at track a few weeks ago with a torque converter on it. So far i...
  7. nds1968

    Gilson - Montgomery Wards Chain / Clutch Guard Question

    Are the covers the same between the different models? I can't tell from these pics...
  8. V

    Vplex Clutch Driver Worth Anything?

    Good morning, Let me start off by saying that I don't know anything about minibikes. I was trying to fix an old engine and through doing research online, I figured out it has a Vplex clutch driver and that perhaps it might have some value to old minibike people? I would hate for a good part to...
  9. nds1968

    Gilson / Montgomery Wards Chain Guard - Clutch Cover

    Wanted a Chrome or painted... shoot me a PM. Thanks, Nate
  10. Dr. Shop Teacher

    Universal Comet 2 speed clutch kit question

    Anybody know if the jack shaft on this kit can be swapped for a longer one? Thinking about converting my two Gilsons from single speed to 2 speed and I need 11 1/2" jack shaft length. thanks! #713845 UNIVERSAL COMET 2 SPEED CLUTCH KIT
  11. Aircooled

    clutch spacer

    Is it necessary to use a spacer with a Predator clutch setup? I've seen it used on occasion and was wondering if it's really needed, or is it taken care of between the key way, set screws, and crank bolt? Thank you.
  12. Peekster

    Nos Comet clutch

    Looks to be NOS comet clutch. 5/8 shaft 40/41 chain $20 plus shipping
  13. trinik7597

    max torque draggin skin clutch

    draggin skin clutch 3 sets of brand new springs , new spring holders , new shoes , two drums and 10 sprokets original paper work too everything included $110 shipped
  14. capguncowboy

    Custom clutch guard -- fits any bike!

    Mini Bike chain gaurd Lol wtf?
  15. MINI-MATIC

    F.S RARE Lil Indian Minimatic 2 speed tranS Driven Clutch NOS Mint Fairbanks Morse

    For Sale,I am selling,my last NOS,Mint Fairbanks Morse Two Speed Transmission Clutch.I re zinc plated it fresh,as the original plating was a bit scaly,absolutely NO rust though,never been mounted on a bike.This is a rare find item to help complete the Mini matic 2 speed setup...Asking $150.00...
  16. trailramdan

    5/8 clutch

    Helping my nephew build his first bike we are looking for a clutch for his 79cc predator engine
  17. CarPlayLB

    GEM clutch guards

    I have 2 GEM brand clutch guards. One is polished (Cheezy, that does not mean they are Polish!) and one is sanded as cast. The polished piece is $40 to you door and the other is $26.00 to your door, lower 48 only! These bolt to the standard patter common to our engines, Tec, Briggs, Predator...
  18. trailramdan

    Predator 79cc clutch

    What size shaft do the harbor freight 79cc engines have? Looking for clutch options for my nephews bike
  19. da0023

    Rupp C-350 Clutch Help

    I noticed the shoe spring on the clutch was stretched & a couple of the shoes damaged. Looks like the retaining clip gave way at some point & the clutch broke loose from the sprocket hub & damaged the shoes & it's carrier. Are the shoes & carrier still available or will these parts need to be...
  20. R

    Wanted clutch for 1970's Rupp Scarmbler

    I am looking for a clutch for my Rupp Scrambler project. It will be going on a Tecumseh HS-40 engine. Thanks
Top