converter

  1. joshua. c.

    new thought about comet torque converter tuning

    When it comes to comet 30 series torque converters mounted on a heavily modified engine, as most know, in stock form they limit the engines rpms. There are several well known ways to make comet torque converters run better but so far there is no magic part that can make one engage at 3000 rpms...
  2. jeep4me

    Comet 40 series torque converter w/engine mount jackshaft

    Selling this great go kart setup....40 series Comet torque converter, with an under engine jackshaft mounting plate. 1" bore on the clutch. Shown on a Briggs OHV engine. Engine is NOT included in this price. Asking $150 plus shipping. Or best offer..... Usps postal money order, cash or...
  3. manchester1

    Comet Torque Converter help

    First time I ever bought one of these Torque converters. Question: Is it normal for the edge of the belt to be wearing since it is brand new? I only rode the bike a little bit and its like fuzz coming from the outer edge of the belt. I did notice when I put it together, I thought it was...
  4. creia

    Heald Super Bronc VT-8 torque converter question

    On the original Comet 30 driven unit: As you face the driven from the left side of the bike, with the holes rotated to the top of the driven, what hole is the spring installed from the factory? (left/#1, middle/#2, or right/#3) What is the best position of the spring for off road, hill...
  5. Sixpac440

    Squealing from Torque Converter ...

    Heathkit Hilltopper, H50, Stock 46 year old Comet. The squealing comes on from take off and fades out the faster you go ... When hard trail riding its always making noise and I question if the TC is pulling apart fast enough when I slow down quickly and go up a hill in the trails because the...
  6. xBrent92

    What brand of snowmobile torque converter?

    So the 3/4" bore can always be adapted to 1" clutch bore with an adapter, possibly more. Has anyone tried it? I am wanting to know what brand and name clutch can be used. Mainly 3/4" or 1" snowmobile Torque converters. I am asking because the power and rpm i need will exceed a gokart torque...
  7. S

    Tecumseh 3.5 hp and Murray Track 2 Torque Converter

    I just bought a Murray Track 2 with a Tecumseh 3.5 hp. I think the clutch is going out on it because it will barely climb small inclines. Instead of buying another I was considering one of the cheap Tav2 knockoff converters off ebay. But am curious if its a direct fit on the engine and is...
  8. I

    Torque Converter Reverse Drive Clutch & Gear

    Built a drift trike but having issues with standard centrifugal clutches burning up. Decided to go with a TC but current frame design prohibits normal mounting. Is it possible to mount the driven gear on the outside of the jackshaft? If so, will the bearing be able to withstand the chain load...
  9. D

    ? question on torque converter vs centrifugal clutch?

    I want to repair this clark cyclops. It had a jackshaft at one point with right side chain to wheel. Now it has direct chain on left side badly done. Gc160 is set to right. I would like to center the gc160 better and replace jackshaft. Thats complicated with torque converter, which is my...
  10. C

    Rupp torque converter noise

    So after a year, my Rupp Roadster2 project is done. Just this past weekend I rode it for the first time...so whats up with the clunking sound coming from the driven pulley? Sounds like metal to metal..after I get going, it stops..It only does it when I first start moving. Am I supposed to put...
  11. D

    ? symmetrical torque converter rotation ?

    The comet symmetrical torque converter page explains the second driven unit as hub needs to be installed inboard with pulley on outboard face. Is it possible to reverse the driven pulley so pulley is inboard with hub outboard?
  12. D

    Question on GC160 torque converter

    I am wondering if this 3/4" auto express torque converter will fit a Honda GC160 for minibike. COMET-TORQUE-CONVERTER-30-SERIES-GO-KART-KIT-CLUTCH-3-4-30-75-12T-35-10T-41/ It's on fleabay. I am assuming a straight Q shaft that's 3/4" but I will measure it before I order. Appreciate any...
  13. D

    Torque converter questions

    New to forum, hello just got a 1971 trail flute 400 MTD,it has a torque converter, it has a 3l8 wide V belt that seems way to thin for pulley or driver, would any one know what with belt to use, 5/8 or 3/4.also regular or the ones with the grooves?
  14. C

    Torque Converter Blues

    Relatively new install of a Series 30 on a heavy machine. One of my riders told me the the driven pulley is not moving. The driver only enough to propel the machine. This is happening at about 2800rpm engine speed max. Driven spring is in hole #1 and unit does move completely when...
  15. Twid

    PMR jackshaft or a Torque Converter

    What would you all recommend for a Briggs 5hp
  16. C

    GTC Torque Converter Shroud

    Shroud for Series 30 (large back plate) units. Drilled, in excellent condition. $20 shipped
  17. C

    salsbury torque converter

    Salsbury torque converter $225 obo vintage nos with some shelf wear 8 1/2" diameter with 1" bore and 1/4" keyway located in Wilkes Barre Pa take PayPal or meet local
  18. Peekster

    Rupp replacement converter

    Helping a friend out. He needs to know if a comet set up will work in place of the original. If so what size 20 or 30 and any thing needs to be done for it. Thanks
  19. M

    1970 Rupp Roadster Torque Converter

    I'm new to this forum and appreciate in advance any help I can get. So the bug bit me a bit later in life and here I am trying to restore a 1970 Rupp Roadster to try to relive my boyhood. I had no idea how hard it was to find parts!! I've kind of given up on finding the original Rupp drive for...
  20. Danny01

    Torque converter?

    Okay I would love to have a torque converter on my bike. Now what I want to know is what I'll have to do to install one. Will I have to chop a chunk off the bottom? Do I need a jackshaft just to line up the 2 sprockets? Please help :)
Top