degree

What's going on guys. I need some suggestions to fix an issue I created for myself on my build-off bike. I'm running a predator 212 hemi and I had to use a 15 degree engine mount so the torque converter would clear the frame. I'm running the stock engine mounted tank. The problem now is most...

For sale NOS never been 20 degree engine. No box but comes with original owners manual. Dated October 1980 Masking tape still on fuel hose connector. This is going to be offered here before I list it anywhere else. I am asking $500 plus shipping. PayPal as friends is ok Text me with...

I am looking for an original 45 degree exhaust elbow for an H50 Tecumseh from 68 or 69.:helpsmilie:

Does anyone have, make or sell a 20 degree carb wedge? I have Rupp's with the slanted HS40 engine. I saw on old post a while back where a guy was selling 20 degree wedges that go if front of the carb but can't find the thread. They were cheap like $10 shipped or something like that. I can't...

OldMiniBikes Diploma and cap for the elite Old minibikes graduate program.

:detective: Need help in finding or compensating for the 20 degree engine mount on a 72 Speedway Shrike I'm restoring with my oldest son. I've been getting pieces from everywhere to make this happen for us. Huge Shout out to "Fat Boy" who has hooked me up with an intact frame:thumbsup: That...

Does anybody have a degree wheel for a briggs 5hp? Could you scan it and send me the picture and give me the dimensions of it, sizes of holes and locations, overall outside diameter? Or just scan of it actual size so I can print it off and laminate it for future use. Thanks again, Ben

Old school Tecumseh air filter w/90 degree intake. This air filter is perfect for those applications where the standard tec filter hits the rear fender on some minis. Can be mounted with filter up or down. This is only the second one I have had in the last 5 years. Not sure if it's rare but...

moroso 11 inch degree wheel with 3 adapters $20 http://img90.imageshack.us/img90/7530/imgp0508.jpg

i was looking at filing one down ?instead of buying one , by filing one i think you end up with a key that dosen,t fit the flywheel properly ? need advise ,thanks wayne

Will this adaptor work on these Tec? Its an alum. wedge to get the bowl of the carb to sit leavel on a Rupp.