...got spare motor I give a run sometime...then noticed those unwelcome squatters in-between a stack of boards..ahhh...a plan comes to mind..I turn on gas just to fill carb bowl and shut off..start engine and shut shed door..come back next day...
Engine numbers are: HM80-155174 Ser 0011C
This engine is off of a Super Bronc that me and the boy are trying to resurrect. I replaced all of the leaking fuel lines and removed and cleaned the carb. We got it started but it won't run for very long. I started it on choke and then take it off...
So we are making some big fiberglass speaker cones for a speaker company and after they come out of the mold they need to be trimmed. I use an air powered die grinder. Due to the fact that I work out of my house I have a small compressor. My buddy says he will bring his brand new Harbor Freight...
Header off one of my CL GX finds. Homemade and nice but I have a F&B on its way from Cali.
Tig welded and about 21 inches long. Has a small ding from the bend die and slopes down to the ground a little. 3/4 I.D.
3 lbs from 10509 and 20$ paypal only.
sorry about pic. they are 90 off from...
Here is what I am starting with on this project. The seat is missing along with most of the variable pulley setup. The engine is locked up and missing most everything except the bare block.
Here is what I am starting with on this project. The seat is missing along with most of the variable pulley setup. The engine is locked up and missing most everything except the bare block.
Here is what I am starting with on this project. The seat is missing along with most of the variable pulley setup. The engine is locked up and missing most everything except the bare block.
Here is what I am starting with on this project. The seat is missing along with most of the variable pulley setup. The engine is locked up and missing most everything except the bare block.
Here is what I am starting with on this project. The seat is missing along with most of the variable pulley setup. The engine is locked up and missing most everything except the bare block.
Here is what I am starting with on this project. The seat is missing along with most of the variable pulley setup. The engine is locked up and missing most everything except the bare block.
Here is what I am starting with on this project. The seat is missing along with most of the variable pulley setup. The engine is locked up and missing most everything except the bare block.
Here is what I am starting with on this project. The seat is missing along with most of the variable pulley setup. The engine is locked up and missing most everything except the bare block.
If anyone can provide a link with online pics and history of this bike I'd be much appreciative. I can't seem to find anything out there that tells me definitively who made this bike and when they made it. Thanks.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.