driver

$10.00 plus shipping

Good morning, Let me start off by saying that I don't know anything about minibikes. I was trying to fix an old engine and through doing research online, I figured out it has a Vplex clutch driver and that perhaps it might have some value to old minibike people? I would hate for a good part to...

I have 2 identical Hilltoppers, I put new Chinese 30 series Tavs on both. They are street legal and get rode on the street at full speed, 35/40 mph. Mine was fine ... my wifes had some vibration. it was recomended that I get the comet TAV spray lube. After applying it the vibration...

What's the best parts to put on a 69727 non hemi 212cc with the rtc-9 head? I ride a 2-speed auto motorized bike that currently tops out around 55mph. The engine currently has a 19mm slide carb, 4* adv timing, removed governor, removed fan and shroud and set up as a rope start, and now has a...

Looking for a comet 40 series 1 inch bore clutch for my super bronc vt10 project.

Engagement @ 1500 RPM (stock springs engage at 2200 rpm) Barely used one time when i was experimenting with a really high gear ratio as you can see they are still perfectly straight. At the Comet website it costs $7.90 plus $8 shipping amounting to $15.90 . My total asking price =...

Looking for a Comet 30 Series Driver with 1" Bore. Can be new or lightly used, Comet or off brand. Need shipped to Hanover, PA 17331.

I am in need and wtb or trade for a 20 series 1" bore driver part of torque converter. I need this for my 1972 mtd with original 8hp Tecumseh engine. Let me know what you have, thanks.

Hi everybody, I have 2 comet drivers. one has steel weights, the other has zinc or aluminum. is one better than the other? or do they engage at a different RPM? Or is there no difference? I recently got a set of lower RPM engagement springs. Im trying to lower the engagement off idle, Im...

GTC 1005 3/4 driver unit. Compatible with Comet TAV2, Series 30 torque converters. New/unused, less shaft bolt/washer. $45 shipped CONUS.

20 series Comet driver in good condition. needs to be cleaned up. $27 shipped

I need a TC-88 complete driver in pretty good shape. Any help would be appreciated. Doc

having a pretty good driven section, which would be the best driver for this torque converter arrangement? I was thinking a Comet 30, but then there's the question of belt length and symmetrical vs. asymmetrical. Any advice is appreciated.

I picked up a new Salsbury 700 series driver and now I need a driven to go with it... will a Comet 40, 44 or 500 driven match up to it? if not what Salsbury Driven will match up? will a Golf cart driven match up? This is my first Salsbury so I'm not sure what will work together..

orig comet 30 series, 1" driver, 5/8 driven, no cover or belt...aluminum backing plate $90

Selling this because i went with a bigger engine on my project.This is in excellent shape.Bushing is like new.Blue spring on driven with excellent tabs.I bought this used,in this shape and it has set in a drawer.Im asking 150.00 obo.Plus shipping in a flat rate box. Driver is 3/4 bore and...

looking for a 3/4" MT tav driver for my Wildcat 500...I have a new driven but need a driver now..

Hi guys, Can I switch out a TC-88 driver for a Comet 20 driver without changing the driven??? My knowledge of torque converters is pretty limited. I realize one is 5/8" and one is 3/4" but does the driven see that? Thanks Doc

Hi guys, OK, Life is getting real frustrating here. I have a toasted engine for a Sears Roper and I have both secured a running engine and a block to rebuild the bad engine. In the process I have lost some parts for the TC-88 driver. I always put things in boxes and bags and I must have lost a...

I'm looking for a Comet 20 series driver for a 3/4" shaft. Used is ok a long as it's in good condition.