drum

  1. E

    Drum brakes intermittently grabbing?

    I picked up a used Axis M200 (CT200U-EX rebrand) and everything is working well except the rear drum brake. Riding it this past weekend and coming down a hill giving it a little bit of slowing brake the bike would grab, let go, grab, let go, etc. Thought it might be the shoes so I grabbed a...
  2. D

    1970 Rupp Roadster Brake Backing Plate

    Hello, I'm attempting to source a brake backing plate for a 1970 Rupp Roadster( part# 15278, #7 on parts list). I currently have one that has a seized actuator cam(part # 13782, part #9 on parts list), but I cannot figure out how to knock out the pin without destroying the entire backing plate...
  3. drenchedgremlin

    How can i get drum brake to grip drum better?

    I have an azusa drum brake system on my tote goat. I have been having an issue getting it to grip properly. Have tried adjusting the arm, & even when i tighten the cable all the way, it still won't stop the bike very well. I noticed the drum itself is pretty smooth & was wondering if i should...
  4. E

    5" drum brake w/ flange

    Hey everyone, I ordered a bunch of parts from OldMiniBikes this week and got the wrong drum/sprocket. Seems that they don't sell a 5" with flange although they have the drum (no flange) and the 5" brake itself. If it helps I got a new Azusa 6" Tri-Star wheel with the order, so that's what I need to...
  5. superflea

    Problems with drum brakes

    First time was on a Herters. I could see the shoes expanding but would not stop under power. I put new shoes on but problem persists. Now this Taco 44 I am setting up for my grandson has the same problem and I have the adjustment very tight. Have the same problem on the VT8-12 front brake...
  6. drenchedgremlin

    Drum brake only grips backwards

    I have a sprocket drum brake on this tote goat i got recently. It barely stops the bike even after tightening it. I noticed that if i wheel the bike backwards it grips really hard but spinning forwards & it doesnt grip nearly as hard. i took apart the wheel to see if maybe there was a way to...
  7. M

    Brake drum shoe pad replacement

    I'm working on what appears to be a Chinese mini chopper, recently the back brake pads fell off of the shoe (they weren't adhered to the shoe) and cracked. Any ideas where I can get new pads for them? Looked just to buy the whole shoe, but none of them online match up with what I need. Thanks!
  8. Sixpac440

    WTB Bonanza sprocket and brake drum assembly for 6" Go-Powers

    My brother beekeeper (Tom) is looking for a Bonanza sprocket and brake drum assembly for 6" Go-Powers .. doesn't have to be perfect, just function as it should .. Thanks Kevin
  9. Ajf

    Junk bonanza drum sprockets

    Looking to buy some junk bonanza sprockets to refurbish. I want to remove and replace with new sprockets so drum should be decent. If you have any style of bonanza sprockets for the gopower, kidney bean or spinner wheels and aren't using them And would sell them for cheap please contact me...
  10. chopperbunch

    Drum brake help found from Azusa

    I emailed Azusa about my drum brake frustration and received a speedy answer. The ol' brake dragging against the drum was my concern with my tri-star wheel with the drum brake kit. Seemed like the brake was hitting the bolt heads when rotated in either direction; hence the 1/3 travel within...
  11. Hemibrad

    Wanted Victor Brake Drum Assembly

    Wanted Victor brake drum assembly. This drum assembly is used with an ASTRO or tabloc 5 spoke wheel assembly. These were typically used on the Barris bikes and others. It should be three pieces includes a wheel adapter, a 4.25 inch cup and the brake housing holding the brake pads and arm...
  12. danford1

    Brake cable adjusting sleeve for drum brakes

    I'm looking for a brake cable adjusting sleeve for drum brakes like the picture below. I know I can buy them at various places but where can I get one without paying a lot for shipping? a lot of places want $7 to ship a tiny thing like this. Heck it probably only sells for $3... Any...
  13. AJaxMini

    Limtco Brake drum assembly for a Stellar

    I'm in need of a Limtco brake drum plate or assembly to complete the wheels for my Stellar Black Beauty. If anyone can help I'd really appreciate it. Cash or trade (if I have something you need). Please PM if you have something. Thank you. A.J.
  14. J

    Re-plating Rupp TT500 clutch drum

    I have an NOS clutch drum, but it had some rust, and I gave it a bath in evaporust, and its just not pretty, and I would like to get re-plated. Any suggestions?:confused:
  15. J

    rupp tt500 secondary clutch drum 13002

    I am looking for Rupp tt500 secondary clutch drum part number 13002 for the jackshaft clutch.
  16. B

    Wanted: Mint TabLoc rear wheel with brake hub and drum. 5 Spoke STYLE

    Hello, I am looking for a TabLoc rear wheel with brake drum and hub. 5 spoke style. looking for one in really nice condition. Please PM me. Thx. Appreciate any help or leads as well. Thanks, Greg
  17. Daniel Coop

    More wheel/sprocket and drum questions(road runner?)

    Need help identifying what sprocket and drum combo can be used on these wheels and what exactly they are. Almost looks like another Bendix sprocket? Was told vintage Roadrunner. Still trying to figure out my wheel upgrade for my Trailblazer's 4's and weather or not these might do the job?
  18. danford1

    Wanted. Rupp hub adapter #18128 and a brake drum 17665

    I need a couple parts for a Rupp Scrambler/Hustler. I need the brake drum #17665 and the wheel hub adapter #18128. It holds the wheel bearing on the inside of the brake assembly. Let me know what you have and how much you wNt for them. Danford1
  19. B

    Victor 4 1/2" brake drum assembly.

    Looking for 2 clean Victor brake drum assemblies in good working order. Were used on Simplex and Rogue mini bikes I believe. What I was told. Appreciate any help or leads. Thanks, Greg
  20. CarPlayLB

    Comet brake drum and band

    I have a Comet brake drum and band for a 1" axle. Both pieces are brand new. $45 shipped lower 48 only. PayPal or interesting trades. I like beef jerky too! I also have a super dooper fancy adapter that will allow this piece to adapt to a 5/8" shaft. Add $20 to the price if you need that too...
Top