dual

im building a twin predator mini, i would like to run one engine to the other with one chain, then a chain from the clutch on the second engine to the rear wheel, as pictured below now i found a clutch with 2 sprockets on it, but they are both on the out side of the clutch do they make...

Now that I have put on the big block,added another 20 pounds of gussets and weigh 350 pounds. I think its time to put on dual rear disc brakes on my racing Montgomery Ward T555. I think I want to go hydraulic. But has anyone used mechanical on their trikes? Any success? What diameter discs are...

This is my first post here, and everyone likes pictures, right? Picked up a cool old Briggs on a broken tiller the other day. I'm trying to stretch my imagination, and figure out what the heck to do with a dual PTO engine. It runs, and I threw one of those hot dog mufflers on there, but it...

Minibike with a type of front suspension. Has a zerk fitting on each fork. Has dual rear sprockets. One on each side. Also has a rear cable operated brake. Engine is a Lauson Tecumseh 3.5hp. Wheels are 7".

Minibike with a type of front suspension. Has a zerk fitting on each fork. Has dual rear sprockets. One on each side. Also has a rear cable operated brake. Engine is a Lauson Tecumseh 3.5hp. Wheels are 7".

Minibike with a type of front suspension. Has a zerk fitting on each fork. Has dual rear sprockets. One on each side. Also has a rear cable operated brake. Engine is a Lauson Tecumseh 3.5hp. Wheels are 7".

Minibike with a type of front suspension. Has a zerk fitting on each fork. Has dual rear sprockets. One on each side. Also has a rear cable operated brake. Engine is a Lauson Tecumseh 3.5hp. Wheels are 7".

Minibike with a type of front suspension. Has a zerk fitting on each fork. Has dual rear sprockets. One on each side. Also has a rear cable operated brake. Engine is a Lauson Tecumseh 3.5hp. Wheels are 7".

Minibike with a type of front suspension. Has a zerk fitting on each fork. Has dual rear sprockets. One on each side. Also has a rear cable operated brake. Engine is a Lauson Tecumseh 3.5hp. Wheels are 7".

Found this pic in a children's book today at work!! Yes work is important.....but this is dual Westbends!! Probably posted before but if not enjoy!!!! :thumbsup: If not Westbends feel free to elaborate!!!!

Time to start shining! Feel free to share your tips on cleaning/shining up the paint. I know the coke and aluminum foil trick for chrome. Any other suggestions??

Does anyone know what this is? Looks kinda rough, its for sale on CL.

I have most of the parts but they need paint and chrome. I will try to load pics tonight of everything I have for it right now. My camera doesnt always connect to my computer and it usually takes like 20 tries if it even works. The paint I have is House of Kolor magenta kandy. I do need a sissy...

I have several trail scooters awaiting restoration, including the twister that has been chilling in the project logs. None of them have gotten much attention because I've been working on this. It's a 79 Honda XL500S. I bought it about 8 months ago and it's ready to rip. The body work is not...

I got 3 BnS engines froma yard sale. 2 of the 3 have dual output shafts. Is there a way i can remove the secondary shaft? I was debating about cutting it off.. Any ideas? Thanx in advance..

Had this fabbed up by a friend. Wife wanted her bike quiet so before I move forward with the rest of her bike and motor upgrades, wanted to get that part of it resolved... she thinks my bikes are too loud... the first MBX11 in the vid, is my daughters... hers is next, something different...

Anyone have any home remedies for installing these bad boys? C-clamp isn't doing it for me and I'd rather not spend the money for the tool.

So I've got my megahaulin beater I built up a couple of years ago to start with. Biggest things I did to it up till this point were a homefabbed swingarm with coilovers, 7hp kohler with TC, modded the original fuel tank into a locking compartment with master kill switch, and made the seat from a...

Better hurry (Other Makes : PATHFINDER in Other Makes | eBay Motorcycles)

I bought this a while back but have decided not to go through with the build, too many projects... dual bearing block cool bore .025 (bored when I bought it) spring pockets cut lifter area welded with valve guide in lifter bore on exh side stock size valve seats top of spring box reinforced...