extra

I just dug these out to see if anyone can use them. White Tecumseh tank and brackets, the spout faces the rear. I painted the brackets white to show the color difference. Second tank is some type of side mount, clean inside and some minor surface rust on the outside. Third is possibly a Clinton...

alrighty guys, my garage is a friggin mess and I could use a little extra $$$ to get some more things done. help me out? all items are shipped from 33981 _____________________________ First line up... my very tiny lineup of Honda stuff. all of it came off a GX120 Since most of it is junk...

Selling off some of my extra Manco parts. The gas tank has been painted black and has no leaks. It will fit a Manco Thunderbird or a Bird bike and i will include the mounting bolts. Next is the seat that is usable(small tear) and the front fender from a Thunderbird bike. $65.00 shipped from...

I just acquired a brand new, never used 13hp lifan . However, the gas tank was removed to see how the motor fit on a minibike and the fuel lines weren't hooked up when I got it. The lower fuel connects to the main fuel inlet on the carb, that much I know. But, there is a second line that...

I picked these 2 Mikuni carbs up Saturday. One came off from an old Yamaha dirt bike (unknown cc). The other is freakishly huge and I have no idea what it would fit. Both seem to be complete, and slide very nicely. I cleaned the exterior of them but that's it. I dont know too much about these...

mini bike for prop 215 med's Times are tough :smile:

If you are a newb and you had an extra 200 bucks for parts inventory, what would you but? Axles,bearing,nuts bolts,ect...throttle cables, just a general backup parts inventory. Thanks in advance.

Fox Thunderbolt Chopper Minibike

I have a honda gx200 motor on my bike that is all stock, im looking for the best 50dollars or less i can put into my bike to get better performance out of it, i have changed the oil,plug,and cleaned the air filter already. I am hopping to get a new light weight flywheel for it at some point but...

Extra cast .310" Isky cam $135 shipped anywhere in the U. S. The .310" cam is anyone of the cams in the back with the compression release.

have some nos gooney cycle trike bodies don't need them all 40 + shipping

Hi guys. I'm new to this site, but looks like this is the place to be if I want to learn about Mini-Bikes. I've always wanted a Mini-Bike as a kid, but my parents never had the money to buy me one. I'm now a school teacher and have a little bit of time and money to put toward this...

I just got done rebuilding the carb for my HS40 and the kit seems to have come with an extra o-ring. Both needle seats have their supplied ring and copper washer but I've got one more and no idea where it goes. The only place I can think is where I've got the drill bit pointed in the photo...

Flat head Kawasaki. Unknown HP, came off a generator running great. Been sitting for a few years. Shaft is tapered at the end Bolt pattern is narrower than Briggs - maybe like the stock DB engine? Has rubber "feet" bolted to the bottom Measures 9" to the top of the shroud WITHOUT the...

i have some extra carbs laying around and i was thinking. after seeing mdbikes twin carb setup and knowing i dont have the head nor the cam nor the funds. why cant i fab up manifold to run twin clone carbs. one carb i think would be my max bored clone carb with a fixed jet and the 2ndcarb would...

I got my chain and sprockets all figured out and took the mini for a spin and ended up flipping it over and it landed on the pullstart side and smashed it:hammer:. Its not made of thick sheet steel like a briggs. I know alot of guys use starters and was hoping someone might have one their not...

Here is the Rupp Roadster 2 that I got off of Ebay, plus a bonus bike that the Guy had. He sold me the purple Duster for what I thought was a good price. Bent forks,wrong rear wheel, and no seat. but I am still happy with it.