If anyone has a 6hp flathead and a micrometer, if you could measure the width of each ring I need to compare them to a H70 Tec rings...I can't find any .010 h70 rings and it looks as though the Briggs has the same bore 2 3/4" which the rings can still be found... There are a few parts that cross...
Anybody have a new style 3hp recoil shroud they are willing to part with? Have an engine with a vertical shaft shroud. Engine uses a cup for the recoil and NOT the clutch style. Thanks in advance!
Happy New year to everyone in the forums helping out us MiniBike enthusiast,
For my first engine build I have decided to go with a Briggs 5hp Flathead from an industrial fan. I am sure there are a couple of threads on flathead builds on this forum already. Although all are great, I still have...
Photos and Video:
https://onedrive.live.com/redir?resid=EF997A0CE0CD14D9!2505&authkey=!AAhWUVtzX99_d1U&ithint=album%2c
This is a RaptorIII from '99, i raced it about half the season and it's been in storage ever since...it ran fine when I put it up.
Now I have it back, and problem is it seems...
Hello, i saw alot of tuned flatheads with Tilltsons, this KZPML Krakow(only thing that is written on it) is also from a chainsaw. Its from a Polish Dolpima 2 stroke, arround 12HP and i want to know what are your experiences with chainsaw carbs on briggs!
Hello to all that have decided to read my post. New guy to the forums here. After searching craigslist and ebay for months for a Briggs IC 5hp flathead I have came here in a last ditch effort to find what I am looking for. I wont say I couldn't find any but the ones I did come across were either...
I'm wondering of putting a newer HORIZONTAL 3.5 hp flathead Aluminum flywheel on a 5hp flathead. I'm aware of the modification to the coil which isn't an issue because I've used the Cast Iron 3.5hp flywheel, but how will the horizontal aluminum flywheel work in terms of Revving for High RPMS 7k+...
Hello Everyone,
I was looking for opinions on the various clutches. I have a Briggs 5 HP Flathead, for a Go Kart. Probably will be doing some mods, so maybe in the 5 to 10 HP range.
Max Torque? Hilliard Extreme Duty?
Also on the chain size. I was looking at a #41 chain with a 60 tooth...
It is a piece of water pipe 6 inches long and the pipe wrench is starting to collapse it and it will not budge. I thought about welding a lug nut on to the end and using an impact wrench. Anyone else dealt with this?
does it exist?
I know OldMiniBikes has som flathead parts, but no camshafts, which is what im buing for the flathead.
and cam, rod, and springs for gx clone.
Since i live in Norway id like to by parts from on place and save on shipping.
Thanx.
Einar-A
Hi there OldMiniBikes!
It has been awhile since I have posted anything so I thought a little update/introduction would be in order. Long time regular reader and browser of the site and I have learned so much from all of you and am thankful for being exposed to that knowledge and humbled by being able to...
I have a flathead 5hp briggs thats beefed up pretty good but its not good enough for me. Where can i get a high performance racing kit for it that will make it go faster and run like a champ with out breaking the bank?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.