gasket

Have an old 97cc and it seems to have carb issues, It also needs a new gasket. Looking to sell

Briggs Raptor 3 tab head, Sandblasted no cracks, Brand new Raptor connecting rod with bolts, New Briggs Gasket, and a NGK commercial grade J19LM spark plug, $45 shipped, U.S. 48. Add another $5 ($50), and I will toss in the raptor cam, (not shown), in Very good condition.

Not sure when I will get to it but I couldn't pass it up. You know i have a soft spot for pacesetters. Not sure what my plans are...it's needs a head gasket...also all the governor linkages are gone...do they reproduce tbose?

Maybe someone can use this. Off one of my pressure washer finds. Comes with allen head engine bolts or choose from pile of engine bolts or no bolts. :wink: 5$ plus from 10509. paypaly because 5$ in paypal can go for a big block gasket or something like that.

i have a 69730 predator that has a mild build. so far it has ARC billet flywheel ARC billet +20 rod black mamba cam header+air cleaner 22mm mikuni 26# springs and im adding a 14cc head ported and milled 65thousands 27mm intake 25mm out. stainless valves locks and retainers and chromoly...

I can't seem to find what's causing the carb to leak. It will slowly drip fuel from the float bowl until the entire tank is drained onto the ground. Thus far, I've tried changing the fuel shutoff valve gasket, the float bowl gasket, and the three carb gaskets with no success.

I have one now, but the throttle shaft has way too much play in it! I need the older version from the late 60's with the small bolt pattern, and the smaller tank to carb gasket...if that make sense. I already have the deep tank for it. Let me know what you have!

Hello all, I have purchased a benelli dynamo mini trail , I was looking for infomation on oil mix engine identification 50 or 65 cc, trans oil what year etc,. I already borrowed the wiring diagram which is identical to mine. the engine was stuck but looks to be able to be cleaned up...

Hey guys. I am trying to rebuild an original Ruttman Toad Tecumseh H35 engine. No luck finding a carb kit w all the gaskets etc. On eBay. Not real familiar w eBay any way. Does anyone have or know where to find what I'm looking for? Engine info is: H35 45350H serial is 0258 w 13637 after...

Where can I pick these up without having to pay a fortune for shipping? They're a lightweight item that fits in an envelope, $10 to ship a couple is a little steep.

Anyone know if any of the steel shim "hi-po" gaskets are available anywhere? This would be for an HS-50 I'm preparing. Any help please, Mike

I am disassembling this little Ruttman my family has owned since new and when I took the rear wheel and sprocket apart I found what looked like gasket material between the wheel halves. It was in real bad shape, crumbling, broken and falling apart. The front didn't seem to have anything like...

The stock is a 0.40 how much of a difference will it make

Just got a .010 head gasket for old style predator and it feels thicker than the stocker. What is the thickness of a stock gasket?

Will the gasket set and oil seal set for an H30/35 fit an H25? I don't see a gasket kit for an H25 in the OldMiniBikes Warehouse. My main issue is the side cover gasket. Someone used black gasket maker with no gasket. It actually held very well. I will go that route if need be, but would rather...

For Sale 2 Keystone TAS manuals,Service and Maintenance Manuals,Never used!.Also included is an NOS side cover Gasket for the Tas Engines.Get these items for about half of what I paid. $20.00 plus $7.00 shipping, Paypal or local pickup,minus a shipping cost.:thumbsup:

Forgot picture,reposted in another AD,moderators,please remove this post

Does any body know the compressed thickness of a graphite head gasket for hs tecumseh engine?

Hey Should i buy the original gasket or can i just use liquid gasket?? It's for HS50

Recently my Tomos TX50 was leaking oil. So i ordered the gaskets from eBay and installed them. It has been a week since i made this video and it hasn't leaked any oil.Enjoy! :smile: http://www.youtube.com/watch?v=1gFg14lBJp0