Hi Gang. First post here.
I hope you guys can help me out with this. I got a really great deal on two Coleman CT100U's which I bought for my kiddos through Walmart.com. The bikes arrived banged up and missing some parts, but that's a story for another time. I was able to get one running by...
I have a 71 Fox Banshee that came with a welded on rear sprocket to the rim.
The tire size it came with is a 4.10x3.50-6
I cannot make left turns without the chain dragging on the ground and popping off
Would it be best to change the tire to a taller one? I dont have much room; I'm not sure...
I just created the account, now I will figure out how to post pics.
I've been tinkering on my baja warrior, and just noticed a random thick washer laying on the ground. I don't recall removing it from anywhere, so I'm hoping someone can identify the part and tell me where it goes.
The...
Hellllloooooo OldMiniBikes Community!!
My name is Justin, I'm new to the site and I'm 16 years old. I live in Highlands Ranch, Colorado, where this thing is VERY not legal :laugh:
I paid $160 for the doodlebug originally from craigslist, with the stock 97cc and no brakes :thumbsup:
I thought maybe...
Bonanza,THE ROLLS ROYCE OF MINI BIKES!
Bonanza BC1000 MiniBike Mini Bike,Ground Up Restoration.
Refinished in black gloss paint.
Jackshaft,Scrub brake.
NEW 49 State NEVER lit off in the box,black Tecumseh,Comet clutch,Seat,Throttle cable,Original wheels and tires.
Located in The...
Like the title said..
I'm planning on buying a brand new predator 212, so that's the only thing that I really dont need other than wheels, tires, fenders, and the frame. I'm in the market for:
Clutch for a 212.
Throttle assembly
Left grip
Gas tank
Seat
Seat cover
Headers
Mufflers...
Still trying to get spark on this H35 side popper. Right off the bat I changed the points and condenser as I had them around and best to just do that anyway. I still didn't get spark. I think disconnected the kill switch wire in case there was a short or a fray in the wire i wasn't seeing and...
at the moment i have a 72 tooth sprocket on my bike (keystone deluxe) and a roughly 12" diameter tire. it just seems a little close to the ground sometimes, especially if i lean in to a left turn. maybe a 60 tooth would be better in my case. any suggestions?
:confused::confused::confused::confused:I will be building a big tire mini bike for myself I'm 6 foot and 325 lbs. I would to make with a ground clearance of about 10 inches something I can use in sand, mud and snow..Thank you for your suggestions::confused::confused::confused::confused:
I bought a H50 Light coil and flywheel from and OldMiniBikes member to convert my non-lighted coil H50 into a H50 w/light coil.
Prior to install the H50 ran perfect and I heard after you remove a magneto it's very heard to get back into correct position. But I still thought what the heck I will give...
Header off one of my CL GX finds. Homemade and nice but I have a F&B on its way from Cali.
Tig welded and about 21 inches long. Has a small ding from the bend die and slopes down to the ground a little. 3/4 I.D.
3 lbs from 10509 and 20$ paypal only.
sorry about pic. they are 90 off from...
Possibly a prototype Harry Johnson original???? :out: I doubt it, came with a parts bike I bought, I searched for while on ebay and through some motorcycle vendors for a match to it to no avail. Its not heavy but it is pretty heavy duty and not the bicycle style, I would say it would be a...
Hi new member here first post, in the process of completely rebuilding a 1969 RETEK CHEETAH looking for any used Cheetah parts and Ideas on a Great engine
I have this old B&S engine. There's no spark. There is a red wire coming out of the engine. I have no knowledge or experience of what this wire is for, or where it goes. I'm beginning to think its a leader for a boat's anchor line. Any ideas ? Thank you very much. :shrug:
Hello—I read the forums quite a bit prior to building my Azusa, so definitely wanted to pay it forward by posting my completed build.
My first minibike experience was seeing my cousin’s wrecked Montgomery Ward minibike in a barn as a kid. Parents said ‘aboslutely not’ to restoring that or...
Never heard of it. Cool though.
http://www.ebay.com/itm/vintage-Groundhog-mini-bike-made-by-reiner-2-person-with-fat-tires-very-rare-/321054096383?pt=Go_Karts&hash=item4ac050bbff
I can't stop my self I recently sold a frame only taco 22 a sears roller and an invader cart frame to clean up my yard a bit. But it seems that I have replaced those with 2 DB rollers 1 DB frame & forks and a Bonanza runner. The DB's are supposed to go to my brothers place to ride out behind his...
This Rupp frame has been modified and ground on
using several different kinds of grinders I think.
Powered by a lousy idling (Sears)Tecumseh 3.5 hp engine.
Sporting near new lousy "Azusa" 6" TriStars.
Lousy job done mounting aftermarket chrome handlebars.
Lousy loose-fitting plastic twist...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.