hack

https://www.youtube.com/watch?v=wPjDaaiCrgA

Any one know what this is or what it started as? $100 but I don't think the engine is original and I'm not so sure about the frame mod's

new work bench location

new work bench location

fabricated wheel stand

fabricated wheel stand

Vintage Wards Mini - A Second Rebirth Hello All - I am new to the site and can only say I wish I had found this forum sooner. There's a lot of good info here and I appreciate the many contributors who are willing to share their experience and expertise with others. It's been a long...

Anybody got a clue?

Started this project a week ago when a friend of mine bought an 80cc Motovox bike from Sears in Saranac Lake, NY for $300. He brought the bike back and we rode it in the parking lot at school. Neither of us were impressed with it. He bought a 208cc motor from northern tool that dropped right in...

Here's the little Cheeftah MB1000 I got from Jay Bell. The steering head had been ripped from the frame, and a bracket added to reattach. The forks were bent and twisted. I removed the front end, repaired the tubes, made a new steering head and welded it on. The little spring cleaned up nicely...

So I've been cleaning up that Bonanza MX1510 frame. The forks were pretty rough inside the sliders were frozen up. The inside slider portion of the forks were pretty bad (bent, and flat spots) so I cut the lowers off of the forks after I got them free. As for the frame, where the swingarm goes...