head

What kind of flow numbers are others seeing on their heads? I've been playing with 27mm intake valves recently and the last couple heads I've been topping out in the mid 70's for the CFM. Here's the flow data for the last head I did. Anybody have any tips to share or have I pretty much reached...

Hello. I got a 5 hp flat head mounted on my Cushman airborne build. Just got the throttle wire and brake working the other day and took the first test drive only to discover a terrible vibration in the handlebars at mid rpm. At idle and higher revs it's fine but the mids are not fun. The briggs...

I have a new 14cc JT-07 clone head that has been ported and polished for 27mm intake and 25mm exhaust valves. Ports have a sand blasted finish, combustion chamber unshrouded and polished, & cut multi angle valve seats. Comes with all new stainless valves, retainers and keepers, and your choice...

hi again, i just took off a head to a 196 Champion motor and noticed it is a non hemi head and i would like to use it if it fits. First question i'd like to ask before tearing apart the hemi: Will the non hemi fit the hemi block? i i would like to install it and so i can buy the 1.3...

Just what the title says " Just Another Flat Head Build " I'm building a 1994 Briggs & Stratton 5hp cool bore engine, no big high rpm build here ...hopefully just a good sounding , clean build.:wink: I have a special place for this engine....and no its not for a build off !:laugh: Seeing how...

Ya say it isn't so? Edelbrock never made a head for the Raptor/5HP engines! That is correct! But as the enterprising stud that I am, I have made this all possible! I have taken the Blockzilla 1 head and had it machined to fit on a Briggs Raptor! This is fresh from the machine shop! These are a...

dont know why i bought this :shrug: looks to be nos some of the knobbies have fallen off 410/350/5 some wear from handling and laying around $50 plus shipping will trade for a general 5 inch make me some offers other tires ? ?? im in southern california ????? only 1 one !

Wanted 1 Carlisle one sided Indian head knobby tire 410/350x4.... I would prefer NOS but let me know what you have and price thanks .... :thumbsup:

I have a 22cc clone head that has been ported and polished for 27mm intake and 25mm exhaust. Comes with stainless valves, retainers and keepers, and your choice of springs (22,26,37). Casting is a 5 bolt valve cover but the cover is included. Head flows 73 CFM at 28". Any questions or want more...

Wanted 1 Carlisle Indian head sawtooth tire 410/350x4.... Let me know what you have and price thanks ....

$65 shipped

So I was wondering... Would I get more power from swapping my head for the hemi head or the 14cc high comp head? Anyone please?

Hey OldMiniBikes, Need 2 to have my Taco 44 project Rollin . Cheers! TLJ :drinkup:

I just seen a Bonanza Head Badge sell on E-bay for 141.00 (Wow)....

I just got a new predator motor (non hemi) to replace an old one. The old one has a RTC-2 marked head and the new one has a RTC-8 marked head. Would the RTC-2 be any better than the 8? We plan to add 18# springs and a mild cam, header and cone filter. Just wondering if any gains would be made...

Today I finished porting a 14cc clone head for I friend of mine . Here are some pics

Hello all, Building my own MB frame and would like some info on the head tube? Could any one school me on what's all involved? Basically, what is the anatomy of a basic head tube? I assume connecting the forks to the main frame with nothing more than a bolt is not a good choice? Appreciate...

2 Double indian slicks. 4.10x3.5x6. Dusty but new. $45 each. 1 double indian head slick 4.10x3.5x6 doesn't say racing slick. slightly thinner than others $35 plus shipping

Hey folks,We just completed the head swap on our modded HF predator. It is SO much easier to pull start. Any thoughts why? PREVIOUSLY- 14cc clone head (self ported and polished...first time), Mod 2 Cam, Honda .625 carb, velocity stack, Header, SS valves, 1.3 rocker intake, billet rod and...

Picked up a motor and am trying to I D it... Its red (Honda?) and the head has JT- 04 - 06 - 16 stamped on it. Im guessing gx 160 clone (duh) but what else can i find out about it with these numbers? There are no other numbers or stickers visable on it