#help

Hi everybody, I just finished building a Non-Hemi Predator 212 with 26 LB valve springs, billet connecting rod, makuni clone 24 mm carb, .308 cam, velocity stack, trumpet, billet flywheel, 10T “max torque” clutch, and a 40T rear sprocket. All this on a 5” FLR frame. I’ve ran into an issue of...

My predator 212 has a wide open throttle when I start it. I tried to bypass my governor and failed so I put the engine back together only to find out it goes full throttle when started. I also took off throttle cable and that didn’t solve the issue.