housing

Shouldn't the side crank case housing cover come off after it lifts from the pins? This model has sealed bearings around the shaft. Do I just have to knock it a little harder? Or is it clipped somewhere? I can get it off the pins but wont budge any more after it is crack open off the pins...

Came off from the Manco Kart that chopped my finger off.. Motor was junk but I figured I need to get SOMETHING out of this deal.. :laugh: Someone (maybe me i think) mangled the slot on the throttle unit so it travels farther (it needed it) but looks not too bad and it all works great.. The...

just picked this up numbers are 130202 06000 01 80032606 could someone break this down for me? did a search & got more confused:shrug: thanks:out:with some help from buckeye=5hp, built march 26, 1980

I have approx. 40 ft of NOS cable housing. This is the old stuff that is metal lined not plastic. The outer shell is lite grey in color and just slightly textured. Perfect for an older restoration. $1.50 /foot or $60/shipped for all of it. I also have one brake cable with red cable housing...

Hello. Like the title says, I need a fan shroud/recoil housing for an 8hp Briggs. Here is a link to a thread from this forum that I started with more info about what I need...

Need a clean one with no starter hump ... No recoil needed ... Thanks

I'd like to thank everyone on here first for all the incredible help. I don't have much to offer but am thankful for all the help! On my mitsubishi 6hp there is a hose that goes directly from th valve housing to the airbox right before the carb. I am assuming that it take atomized oil and...

Need a blower housing for HS50. Needs to have the recoil mount holes/studs orentated flat (in a square) Needs to have Tecumseh numbers. No bends, cracks or extra holes. Needs to be real nice or even new. Thanks!

Up for sale are the two grey reworked (fixed) orig TH fenders... both will be finished in a coat of high build primer this weekend,,,, The white one is a new fiberglass copy I'm working on.. The Tec cover is in great shape, it came off an engine with barely any time on it.. Fenders $65...

I need the recoil started housing and working pull started for a B&S 80202-0249-01-6711203 three HP engine. Mine has broken tabs that hold the spring wheel in place. Thank you.

Looking for a solid Tec HS50 recoil housing. Need one without the primer bulb holes and it would be the type that used the old metal recoil with the 4 thread studs not the newer plasic type. Thank you

Tecumseh Air Filter Housing HS40 Flat head I really need this if anyone has a spare.. thanks PM me

I need a good working recoild/blower housing assembly for a 3.5 hp horizontal shaft engine.

looking for a 1967 briggs 3hp blower housing

Will a blower housing from a 70's 4hp flathead fit on to a 70's 5hp flathead?

Looking for a clean straight blower housing, NO starter bump..... I don't care if it has the two threaded inserts above the recoil, I can weld them shut.... Just need a clean cover.... (recoil can be optional)

okay so heres the deal, i was swimming in the pool at the apartments where i used to live, and this dillbag james came up and took my bike, so after he couldnt figure out the kill switch he brought it back. after i got it back the pull starter is stuck out of the housing, any one no how i can...

very nice shape. recoils works, has fuel pump and lines attached to housing, on/off switch is there. if anyone is interested id like to get $30 + shipping for it. paypal only. can take pictures for those interested.

I have an older H60 blower housing(no recoil). is has a few small dings but nothing that couldnt be banged out. $20.00 + shipping can take picture for interested parties. Can glass bead for you so its ready for paint for another $10.00 also have a lot of governor parts. Outside arms, inside...

I am looking for the oval style, not the round one with the cap on the end. I think they might be on a different model besides the minibike engines. I need something small. Thanks.