intake

  1. roccosbike

    24mm mikuni and intake for briggs raptor

    Looking for new or very good condition VM24 Mikuni and Billet intake for a Briggs Raptor engine. Pulse fitting on intake a plus.
  2. T

    Rejetting after intake and header upgrade

    Is it necessary to rejet after putting a stage 1 upgrade?
  3. gammatg

    Wanted h35 exhaust for a slanted intake motor

    Looking for a correct exhaust for this.
  4. David wulf

    Polished aluminum intake manifold

    I have a aluminum intake that will mount a mikuni 22 to a Briggs 5 hp . It has been polished by me . Price is 45 shipped OBO
  5. B

    Slant Intake for HS40

    The slant intake from black widow motorsports states that it is for both HS40 and HS50 engines. Is this possible? I am wanting to know if anyone has tried the slant intake listed on an HS40 engine size using a floated carburetor that used to run an unslanted diaphragm carb setup.
  6. danford1

    Running a HS40 non slanted intake on a slanted engine.

    I'm working on a Rupp Scrambler with the slanted engine. I have a HS40 I want to put on it but it doesn't have a slanted intake. I'm sure I'm not the first one to do it. What are your experiences using a non slanted intake on a slanted engine? I'm searching for a slanted intake but haven't...
  7. David wulf

    Mikuni 22 to Briggs intake manifold

    For sale is a steel intake manifold for a mikuni 22 to a Briggs 5 hp . Price 30.00 shipped
  8. David wulf

    HS 40 slanted intake

    For sale is a tech slanted HS 40 intake , came off the hs40 rupp motor I have . Price 60.00 shipped OBO
  9. David wulf

    Intake manifold , mikuni 22 to Briggs 5 hp

    For sale is a steel intake manifold to bolt a mikuni 22 to a Briggs 5 hp . It's about 2 1/2 inches long and angles out to the pull start side slightly, to get it away from the exhaust. Price is 30.00 dollars shipped
  10. Rapidrob

    I need a Stainless Steel air intake tubing cut and re-welded

    I have a custom made Predator air intake that I need cut and rewedded 80 degrees from where one end of the pipe it is aiming now. The air intake tubing is about 16-18 gauge in thickness. It is about 10" long. Anyone here able to do this?
  11. M

    Briggs Raptor intake for Mikuni carb

    Anyone know where i can find this intake?
  12. paul kellam

    Please help I.D. intake manifold

    Hello all, I found a old tecumseh intake manifold in my parts bin it is stamped 51 0 124 any info would be appreciated
  13. markus

    katcart stuffer intake for Power products AH engines??

    I picked up a couple of NOS Homelite 4 pedal reed cages that I will be putting fiber reeds on along with one I already have thats going in a Westbend 700 with a cloned go power stuffer. Since I will have some spare assemblies I was thinking about using one for an AH61 I have. Kat cart has their...
  14. R

    H 35 Slant intake

    Does anyone know if a slant intake from a H 50 will fit a H 35 ?
  15. L

    Coughing back from intake

    Sometimes on Startup engine coughs through intake. But once running all seems fine. Never had this happen until changing flywheel to a Billet flywheel. The flywheel is 8 degrees advanced timing and 32 before top dead center. Do I need to change the cam or is the factory stock cam okay. This is a...
  16. R

    H 35 slant intake

    I'm looking for a slant intake for a Tecumseh H 35
  17. Peekster

    Tecumseh slant intake and exhaust

    Nice Hs40 slant intake. media blasted $40 shipped. Taylor exhaust Has been repaired. $42 shipped
  18. Not so mini bike

    Hs50 slant intake and carb

    Like it says up there. The real deal hs50 slant intake and original carb. $85 shipped
  19. delray

    making a intake

    i thought this was pretty cool how this guy made a intake and it came out like it was made on a cnc machine. looks easy to make. just little time in setting things up and not rushing it. https://www.youtube.com/watch?v=fLPhUcR6sY4
  20. L

    Mikuni intake with pulse fitting for clone gx200

    35$ shipped image post
Top