internal

  1. IMG_0451_1_1

    IMG_0451_1_1

  2. IMG_0450_1_1

    IMG_0450_1_1

  3. Z

    Open up internal front springs?

    Is there a way to replace a broken spring inside an internal spring fork? Previous owner just bolted the upper and lower forks together disabling them.
  4. K

    72 or 60 tooth rear sprocket 5" internal drum 3 1/4 hole pattern

    I'm looking for a rear sprocket in 72 or 60 tooth with a 5" internal drum with 6x3 1/4" hole pattern straight across. All I can find is 4 1/2 drum and the wrong bolt pattern.
  5. bigevilone2

    Trailhorse INTERNAL fork springs

    OK all you Trail Horse hoarders, (you know who you are) ! I need a set of internal fork springs for a Trail Horse. Please let me know what you got. Thanks
  6. Midyrman

    Bonanza / Fork / Ribbed Dust Boots

    Looking for an original pair of the ribbed boots for the internal spring front shocks. Thanks Tom
  7. 1967 Tempest

    PLEASE post your Torque-A-Verter brake pics

    I have tried so many different brake combo its nots funny. The latest try is a 4.5" internal drum brake, but the drum was not drilled for INST so I redrilled it. It is a hair out of alignment and it broke off the stud I had in place holding it. I am going to try one more time to get this right...
  8. ArcticMinibike

    Not Your Typical Sebac Shock - Disassembly and Identification of Specific Application

    I picked up a set of Sebacs recently that were not of the usually minibike variety. I'm assuming they might be from a moped. Can anyone confirm? They are the same length as the common minibike variety, about 13" but have a different eye casting design on each end. They are genuine Sebac brand...
  9. R

    Honda internal hidden throttle how to.

    This is a short write up on how to install the Honda Minitrail hidden/internal throttle assembly. The hard part is the drilling and milling of the handle bars. Ideally, you will want to use a mill, but you could do this with a hand hand drill and grinders and files. The process begins with...
  10. M

    Internal or external coil on h50

    Which is preferred and why? Point or no points? Is the main want for points because it is period correct?
  11. Stangrcr1

    H60 internal coil

    Here I am trying to get spark from this H60 before I torque the flywheel on. It will be a pain to change it after, so.... New points/condenser from OldMiniBikes. Timing set as per Tecumseh manual(with the head off, .080" before TDC) Points gap .020" I set the flywheel on the crank with key and hand...
  12. cyruss503

    HELP!! WTB 5" internal brake drum!!

    Hello all! I am in need and could REALLY use a 5" brake drum for my gopower wheels so i can have the front and back rim match! lol Anyway, If ya happen upon a used one... I'll most likely buy it!! thanks in advance!~ :scooter:
  13. markus

    internal throttle anyone???

    anyone done an internal bar throttle setup yet? Problem I am finding is anything for 7/8" bars, If I do it I guess I will just lop off the end of a Z50 handlebar and graft it onto the bars of the bike. Short of that I want a throttle setup that would at least put the exit of the cable...
  14. PAPSTISY

    Tecumseh Internal Crank case damage

    Well I decided to open up the block that came on my recent find. Some might have read the other post regarding the motor. http://www.oldminibikes.com/forum/tecumseh-engines/77697-a.html Knowing there was new side case nuts on the block I couldn't take it anymore I had to open it up. At...
  15. aprophet2

    New Tec 3.5 internal threaded shaft size?

    Anyone know what size bolt fits the internal threads inside the shaft of my new Tecumseh powersport 3.5 engine? I don't seem to have anything that fits in my spare bolts and don't know what to grab at the hardware store. THanks!
  16. owend

    5 Inch Internal Brake Drum

    I wanted to see if anyone had a used part for sale before I order a new one. The one I need is the same as the 5 inch Bonanza style (asuza) and has the brake arm and a stud to mount it to the frame. If you have one that would work and is in good shape let me know. Thanks, Owen
  17. minibikes4life

    internal expanding brake?

    i am planning on redoing one of my minibikes, i want to use these wheels: AZ10154 - 10" Steel Wheel w/Riveted #35 Sprockets & Drums-60 Tooth, 5/8" Bearing these wheels call for a internal expanding brake: AZ2208 - 4-1/2" Anchor Backing Brake Assembly (minibike) 5/8" Bore basically...
  18. S

    Internal expanding brake

    I need some info/pics/advice on how to get a 4 1/2" internal brake to work on a Super Bronc VT-812 Found the brake on Northern Tool but have found no way to secure it from spinning with the hub! Thanks for any advice
Top