issue

Hey guys, my 212 predator wont idle right. When I start it it wont just sit there, it will just try to move. If i try to ride it any i always have to hold the brake when going slow. When I try to put any throttle in it it acts weird and will spit and sputter. Also i installed a stage 1 kit and...

I have a 5 HP Briggs Model # 136212 Type 1028 E1 Code 970818YB I changed the fuel tank, repaired the choke and fuel pump diaphram. I haven't opened the case up I am hoping that won't be needed. My problem is the thing don't sound right. Check out the videos see if you can tell me...

Hello, I just picked up a baja doodle buy on craigslist. Bike looks to be in great condition except the previous owner's daughter ran into the garage and bent the forks all up. I took front end apart and bent everything back to shape. Got the bike started up on the second pull but noticed...

I'm trying to rebuild my H50's carb. The rebuild kit came with 2 welch plugs, and every single piece of instructions online indicates there should be 2 welch plugs on the carb body that need replaced. I wanted to fully disassemble the carb before soaking it in Chem Dip for a thorough clean...

New to this site/forum. I have two (2) Murray Track 2 minibikes that I bought for my sons in 2001 or 2002 from Walmart. They have been through hell and back and are sitting in my garage. Both run, but not well. Probably should replace the 13 or 14 year old plugs, plug wires, and clean the...

This site and OldMiniBikes Warehouse have been helpful to me in my efforts to learn more about small engines through hands-on working with them. I have a 6.5 hp clone in my Baja Warrior and with the gov removed, it has been fun! It is fun in my opinion to work on engine mods in a toy like a mini-bike...

hello, new to the site and having a issue with a warrior 200. bought it a few yrs ago and its been ridden a handful of times. bike has maybe 3 hrs tops on it. went to start it today and it would only run with the choke on, as soon as choke was off it died. so took the carb all apart and sprayed...

i have a baja warrior with a home lite 196cc engine and a torque converter on it. fyi i'm a big guy 260lb well i was riding it pretty hard jumping small hill's getting a little air and such when i parked it i shut it off come back a hour later and she seems to have lost her power unless i...

Hi, lurked here for a bit for valuable info and now looking for some specific help from the insightful members here. I have a Predator 212 that I upgraded with new header/exhaust and intake. I also bought the etube and new jets .36 and .37. It idles well but when I give it gas it kills...

The plastic under the foam is obliterated , Any simple fix or just cut a piece of wood and staple it back on to the wood ?

I've trying to finish 3 of my 4 bikes, everything is done with the exception of the chain. I've got everything measured. But the chains keep getting thrown. I think it is an alignment issue, does anyone have any tips and tricks on getting chains to sit right??

Got myself in a pickle today it seems, bought a box of RLV gold/gold chain and much to my dismay, it does not fit in my #35 chain break. Anyone else had this issue? I bought my chain breaker from OldMiniBikes. Is there an RLV specific chain breaker? Thanks!

I can't seem to get my bike to idle . It just runs at high RPMs . Adjusting the fuel/air still can't bring it down .is this a jet issue ? I don't know what size jets it came with. Any help would be appreciated .

Looking at this pic I just realized something. I have one shock working and one not. I haven't touched this bike in a while but when I go to fix this issue, how am I going to twist these forks off with that fender bracket joining them? Looks like I'll have to use brute force and...

Hey guys, I tried re-posting to my original thread but was denied. Here is the link: I replaced the driven pulley, axle and bearings with the help of Scott and Ron Kimball. Super cool guys and very helpful. Unfortunately, I am still having the same issue as before, the rear tire spins...

Hi guys, Just joined the site yesterday so please forgive me if I step over any boundaries. The history, I purchased this bike new approx 7 yrs ago and immediately found numerous bugs that needed addressing, all supposed sealed bearings had to be replaced immediately along with numerous other...

Looking for the issue with the Terra cat review. I think it's a 1970 year issue. Mac checked for me and couldn't find it, but he's missing the January, may, June, and December issues. Does anyone have it and would like to sell that issue?!

I'm upgrading a Monster Moto MMB 80 with a 212 Predator and ran into an issue when installing the new (longer) chain... I cut the chain to what I thought would be the right length but when installed with the tensioner fully relaxed it was too tight so I added one link (#35 chain) and with the...

I have torn this thing completely down cleaned every single orifice, port , jet , emulsion tube, needles and I still cant get this thing running . I swapped the pulse jet for the flo jet because of fitment issues and now It wont get any fuel . Well it gets fuel but in the bottom of the carb and...

Been off here for a while. Have too many other projects. Just got back to my Super Bronc. Had to fix the brake and carb. Got it running good now. The problem I have is the seat moves side to side. It makes it kinda strange feeling. Any way to tighten it up. Way thinking of putting a track bar on...